NetComm Gateway Series manual Description

Page 29

•Group Hunting: Select group hunting when there is an incoming call and the gateway will automatically assign an unassigned call according to the Hunting Priority. If Line 2 does not want to be set as an assigned line to receive any inbound calls, the function can be disabled. Users can also use the Up or Down key to adjust hunting priority (No setting is required for the FXO interface).

•Enable FAX: Enable this line to detect if there is a FAX tone to transfer the codec.

Description:

•Trunk Hunting Order: To set FXO dial-out mode when there is an incoming call dialed FXO representative number. (This option only appears in the gateway which has more one FXO ports) First Idle: The gateway will assign each unassigned call from first FXO line.

Sequential: The gateway will automatically assign the first unassigned call to the first FXO line. The second FXO line will dial the second unassigned call out. Each line will be used.

•Transit in Busy Tone Limit: The duration the VoIP gateway plays a busy tone before FXO port goes on-hook. Used to notify the caller from PSTN that this call is finished.

•Ring Time Limit (10 - 600secs): The timeout to cancel a call when no one answers.

•Enable End of Digit Tone: The VoIP gateway will play a “Beep-Beep” tone to notify that the call is in progress.

•VoIP Calling Notification: The gateway will play a tone to notify the call is through VoIP.

•Force Calling Thru PSTN code: Dial the code to get a PSTN line for dial out. For example: If you specify “33” in this option and would like dial “23456789” through PSTN, just dial “33 23456789”

•Support One Way Media: If it is disabled, the system will send RTP immediately when the connection with Proxy is set up. The default is enabled. If communicating with other Gateway has problem, please disable this function.

•Hunting/Ring: It is able to set FXS group hunting using simultaneous ring or sequential ring.

•Sequential Ring Time: To set the ring time of each port, when sequential ring is chosen.

•Hunting Priority: it can be adjusted using the Up or Down arrows.

SmartVoice Gateway(s) User Guide	9
YML832 Rev2

Image 29

Contents Reference Guide Contents To ensure your Gateway complies with Australian Standards Important NoteProduct Overview IntroductionVoIP Service Broadband ServiceItems that you will need and things you will need to know Computer/NetworkAdvance Firewall and DoS Protection NetComm SmartVoice Gateway FeaturesVoice Features Configuration & Maintenance Network General SpecificationsFeatures are only available in models which have FXO ports SmartVoice Gateways User Guide YML832 Rev2 Rear Panel all models Restore the GatewayConnecting your SmartVoice Gateways Installation and ApplicationsNetwork requirements Network ConnectionsGateway Assigned with a Public IP Address Requirements Gateway behind a NAT/Firewall NetworkStun client Needs to be set up as either in static IP, DHCP, or PPPoE Integrating the SmartVoice Gateway with PBX Telephone ConnectionIntegrating the SmartVoice Gateway with PBX Integrating the SmartVoice Gateway with PBX Instructions Configuring the Gateway via WEB BrowserIP Configuration Setting WAN Port Network SettingsSetting Dynamic IP Dhcp Clone MAC DNS SettingsNetwork Settings LAN LAN interface modeWAN QoS QoS SettingsNAT/DDNS NAT Traversal Example DdnsPrefix Number Rules Telephony SettingsHotline Functions FXO Line VoIP call in optionsDescription SIP Settings 164 SmartVoice Gateways User Guide Each line registers to Proxy independently FXS/ FXO Representative number registers to ProxyPrivate Network Server SettingsPrivate Network Numbers Calling Feature Instructions Calling FeaturesAdvanced Options Payload Type payload type of RFC2833 Flash Time Line SettingsCodec Settings Fax Settings Drop Inactive Call Digit Map Phone Book Speed Dial Caller Filter Transit Call Control Gateway a PIN Code * Gateway B Number Dialing principle to enable PIN codeLong Distance Exception Table Long-Distance Control TableCPT parameters Table CPT/Cadence SettingsBusy Tone Cadence Measurement CPT Auto Detect Direct Connection to Pstn SmartVoice Gateways User Guide YML832 Rev2 Connected to a PBX Extension Line 36008914 Filling in the CPT Table Save SettingsCurrent Status and System Information RTP Packet Summary Stun Inquiry Ping Test Port Filtering IP Filtering MAC Filtering Virtual Server DMZ URL Filter Special Applications DoS Prevention Settings Enable Source IP Blocking Block the IP NTP Network Time Protocol Backup and Restore ConfigurationProvision Settings System Operations Save Settings Software Upgrade Logout Preparation Configuring the Gateway via IVRConfiguration Methods Inquire Current Gateway’s WAN Port IP address IVR Interactive Voice ResponseDNS IP address Set/Query IVR Functions TableSet/Query Gateway Telephone Number Representative Number Adsl PPPoE Settings IP Configuration Settings WAN port Static IP SettingsPPPoE Password Setting PPPoE Account SettingsSave Settings and Restart Select PPPoEPPPoE Character Conversion Table Dialed Number Processing Flow Dialing and dialed number routing principleInstruction End 10BASE-T Appendix a GlossaryDNS Http NAT TCP VSP RJ-45 Network Ports Appendix B Cable InformationCross-Over Cabling Straight and crossover cable configurationStraight-Through Cabling Contact Information Appendix C Registration and Warranty InformationProduct Warranty PO Box 1200, Lane Cove NSW 2066 Australia