NetComm Gateway Series manual DNS Settings, Clone MAC

Page 22

BigPond

Click “BigPond Cable”. Enter User Name and Password and then click the “Accept” button at the bottom.

DNS Settings

Domain Name Server (DNS): While a gateway is accessing another gateway or computer with a hostname, it will look up the IP address from the DNS provided by the ISP. The ISP whilst negotiating with PPPoE or DHCP usually assigns the DNS information. In the case that the DNS is not assigned automatically or WAN port is assigned with a static IP address, the DNS information must be assigned manually.

Auto	Gateway uses primary & secondary DNS addresses from
	ISP’s DHCP server or PPPoE server.
Manual	Enter the primary & secondary DNS addresses manually.
	Please be sure the IP addresses are correct otherwise the
	gateway will not be able to access any hosts with their
	hostname.

Clone MAC

Some Internet Service Providers (ISP) assign the bandwidth via the MAC (Media Access Control) address. You can click the “Clone” button to type in a MAC address which is recognized by ISP. It is only necessary to fill in the field if required by your ISP.

The “Your MAC Address” will be blank as you log in through WAN port.

22	SmartVoice Gateway(s) User Guide
	YML832 Rev2

Image 22

Contents Reference Guide Contents Important Note To ensure your Gateway complies with Australian StandardsIntroduction Product OverviewItems that you will need and things you will need to know Broadband ServiceVoIP Service Computer/NetworkVoice Features NetComm SmartVoice Gateway FeaturesAdvance Firewall and DoS Protection Configuration & Maintenance Features are only available in models which have FXO ports General SpecificationsNetwork SmartVoice Gateways User Guide YML832 Rev2 Restore the Gateway Rear Panel all modelsInstallation and Applications Connecting your SmartVoice GatewaysGateway Assigned with a Public IP Address Network ConnectionsNetwork requirements Gateway behind a NAT/Firewall Network RequirementsStun client Needs to be set up as either in static IP, DHCP, or PPPoE Telephone Connection Integrating the SmartVoice Gateway with PBXIntegrating the SmartVoice Gateway with PBX Integrating the SmartVoice Gateway with PBX Configuring the Gateway via WEB Browser InstructionsNetwork Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp DNS Settings Clone MACLAN interface mode Network Settings LANQoS Settings WAN QoSNAT/DDNS NAT Traversal Ddns ExampleTelephony Settings Prefix Number RulesFXO Line VoIP call in options Hotline FunctionsDescription SIP Settings 164 SmartVoice Gateways User Guide FXS/ FXO Representative number registers to Proxy Each line registers to Proxy independentlyServer Settings Private NetworkPrivate Network Numbers Calling Features Calling Feature InstructionsAdvanced Options Payload Type payload type of RFC2833 Line Settings Flash TimeCodec Settings Fax Settings Drop Inactive Call Digit Map Phone Book Speed Dial Caller Filter Transit Call Control Dialing principle to enable PIN code Gateway a PIN Code * Gateway B NumberLong-Distance Control Table Long Distance Exception TableBusy Tone Cadence Measurement CPT/Cadence SettingsCPT parameters Table CPT Auto Detect Direct Connection to Pstn SmartVoice Gateways User Guide YML832 Rev2 Connected to a PBX Extension Line 36008914 Save Settings Filling in the CPT TableCurrent Status and System Information RTP Packet Summary Stun Inquiry Ping Test Port Filtering IP Filtering MAC Filtering Virtual Server DMZ URL Filter Special Applications DoS Prevention Settings Enable Source IP Blocking Block the IP Backup and Restore Configuration NTP Network Time ProtocolProvision Settings System Operations Save Settings Software Upgrade Logout Configuration Methods Configuring the Gateway via IVRPreparation IVR Interactive Voice Response Inquire Current Gateway’s WAN Port IP addressIVR Functions Table DNS IP address Set/QuerySet/Query Gateway Telephone Number Representative Number IP Configuration Settings WAN port Static IP Settings Adsl PPPoE SettingsSave Settings and Restart PPPoE Account SettingsPPPoE Password Setting Select PPPoEPPPoE Character Conversion Table Instruction Dialing and dialed number routing principleDialed Number Processing Flow End Appendix a Glossary 10BASE-TDNS Http NAT TCP VSP Appendix B Cable Information RJ-45 Network PortsStraight-Through Cabling Straight and crossover cable configurationCross-Over Cabling Appendix C Registration and Warranty Information Contact InformationProduct Warranty PO Box 1200, Lane Cove NSW 2066 Australia