Connected to a PBX Extension Line
If the gateway is connected to a PBX extension line, then the busy tone of both the PBX and the PSTN must be detected.
Connecting to a PBX extension line and detecting the busy tone of the PBX
| 307 |
| 36008913 |
| 301 |
Note: | The above diagrams show a |
| An 8 port SmartVoice gateway could also be used depending upon your network |
| requirements. |
•Connect one of the PBX extension lines to the Gateway FXO Port.
•Detect Channel: Enter 4 (if the trunk line is connected to P4, and uses P4 for outgoing detection).
•Phone Number: Set the number of the FXO line
•Dial Number: Enter the number of the end to be
•CPT group: Enter the group to save your settings to once the test has been completed.
•Finally, click the “Accept” button.
54 | SmartVoice Gateway(s) User Guide |
| YML832 Rev2 |