Murphy CE-05171N manual Magnetic Pickup MPU, Digital Outputs do

3.1.4 Magnetic Pickup (MPU)

Number of Devices: 1

Device Types: Magnetic Pickup or MPU, (5 to 120) Vrms, (30 to 10k) Hz.

There are two screw terminal connectors for the Magnetic Pickup .

Terminals 64 and 65 are MPU terminals.

Magnetic Pickup

C3-1

3.1.5 Digital Outputs (DO)

Number of Devices: 10

Device Types: Discrete Output, Normally Open (N/O) or Normally Closed (N/C)

●Four (4) relay outputs, form C, dry contacts

●Four (4) FETs (high speed)

●Two (2) IGBTs (high power)

There are three screw terminal connectors for each relay output and two screw terminal connectors for each FET and IGBT output.

Terminals 70 to 81 are for the four relay terminals. Terminals 82 to 89 are for the four FET terminals. Terminals 90 to 93 are for the two IGBT terminals.

Green LEDs give a visual indication of active output signal.

Warning: A heat sink is attached to the cover using acorn style nuts. The surface area around these fasteners can become very hot. Avoid contact.

Digital Outputs

C3-1

CE-05171N page 8 of 44