RUN
STOP
RUN/STOP
Operating Status Screen
Initiate or cancel a start sequence.
Set Up Screen
No associated action in either Shutdown mode, or Remote mode on standby. Initiate stop sequence when held for two seconds, if equipment is running.
Edit Screen
No associated action.
ARROW UP
Operating Status Screen
Scroll up one line. Automatically repeats if held down continuously until reaching the first line.
For history screens, scrolls up one history (for example: Shutdown or Event).
Set Up Screen
Scroll up one line. Automatically repeats if held down continuously until reaching the first line.
Edit Screen
Increment the digit selected by the cursor (from 0 to 9). The user will not be allowed to increment the selected digit if it would result in exceeding range limits.
ARROW DOWN
Operating Status Screen
Scroll down one line. Automatically repeats if held down continuously until reaching the final line.
For history screens, scrolls down one history (i.e. Shutdown or Event).
Set Up Screen
Scroll down one line. Automatically repeats if held down continuously until reaching the final line.
Edit Screen
Decrement the digit selected by the cursor (from 0 to 9). The user will not be allowed to decrement the selected digit if it would result in exceeding range limits.
ARROW LEFT
Operating Status Screen
Display previous screen. Automatically repeats if held down continuously until reaching the first screen.
Set Up Screen
Display previous screen. This key has no action when in a
Edit Screen
Move the cursor to the previous digit.