6.2.5 Gage Display
| C |
| TM |
|
|
|
|
|
|
OIL PRS |
| WTR TEMP |
| |
| 42 | PSI | 145 | °F |
|
|
|
| |
BATTERY |
| ENG SPEED | ||
13.7 | VDC | 1250 | RPM | |
___________________________________ | ||||
REMOTE |
|
| 0000.5H | |
| WARMUP |
| B2 TIME=140 | |
|
|
|
|
|
Custom Gage Sreen
This is an example of a custom gage display. Configured soft- ware orders the data as needed. This display provides larger characters for easier viewing as well as a means to prominently display items of interest. Unacknowledged alarms will overwrite the bottom half of the lower two gage boxes. The two bottom lines are used to display the mode, hours, state and active timer status.
6.2.6 Line By Line
C | TM |
|
|
|
|
ENGINE SPEED | 1140 | RPM |
ENGINE OIL PRESS. | 47 | PSI |
INTAKE MFD PRESS. | 7.5 | ‘HG |
JKT WTR TEMP | 130° | F |
AUX WTR TEMP | 92° | F |
___________________________________
REMOTE | 0000.3H |
WARMUP | B2 |
This is an example of a line by line status screen for engine parameters.
The MConfigPro software orders the available data as needed.
Notice that there are no up/down arrows at the bottom of the screen because there are no additional lines to be displayed on this screen.
Operating Status Screen 1
C | TM |
|
|
|
|
COMP. OIL PRESS. | 74 | PSI |
SUCTION PRESS. | 35.3 | PSI |
DISCHARGE PRESS. | 265 | PSI |
DISC. PRESS. TARGET | 270 | PSI |
COMP OIL TEMP | 105° | F |
DISC. TEMPERATURE | 130° | F |
COOLER TEMPERATURE | 105° | F |
AMBIENT TEMPERATURE | 91° F | |
REMOTE | ▼▲ | 0000.3H |
WARMUP |
| B2 |
This is an example of a line by line status screen with more parameters.
If the parameters do not fit on a single screen, up/down arrow icons at the bottom of the screen can be used to scroll up or down. The two bottom lines are used to display the mode, hours, state and active timer status.
Operating Status Screen 2
6.2.7 Custom PID Screen
| C | TM |
| |
|
|
|
|
|
| SETPOINT | 75 | PSI | |
|
|
|
| 75% |
|
|
|
| |
|
|
|
| |
| LINE PRESSURE | 65 | PSI | |
|
|
|
| 75% |
|
|
|
| |
|
|
|
| |
CONTROL OUTPUT
80%
SUCTION PID
___________________________________
REMOTE | ▼▲ | 0000.3H |
WARMUP |
| B2 TIME=140 |
The user may choose to display any configured PID functions in this convenient format. The control output will be displayed as a percentage of the range. The bottom two lines are used to display the mode, hours, state and active timer status.
CUSTOM PID Sreen