6.3.2 Digital Input
C | TM |
| DIGITAL INPUTS |
|
___________________________________ | ||
DIGITAL INPUT 1 | ▼ | |
DIGITAL INPUT 2 |
| |
DIGITAL INPUT 3 |
| |
DIGITAL INPUT 4 |
| |
DIGITAL INPUT 5 |
| |
___________________________________ | ||
D_IN_01 | N/0 | ▼ |
___________________________________ | ||
▼▲ |
| |
▼ MORE MENUS |
| |
|
|
|
Digital Inputs Setup Screen 1
C | TM |
| DIGITAL INPUTS | ||
___________________________________ | |||
DIGITAL | INPUT | 1 | ▼ |
DIGITAL | INPUT | 2 |
|
DIGITAL INPUT 3
DIGITAL INPUT 4
DIGITAL INPUT 5
___________________________________
D_IN_01 | N/0 | ▼ |
___________________________________
ENTER-ACCEPT ▼▲ MODIFY SELECTION
Digital Inputs Setup Screen 2
6.3.3 Digital Output
C
TM
DIGITAL OUTPUTS SETUP
___________________________________
DIGITAL OUTPUT 1 | ▼ | |
DIGITAL OUTPUT 2 |
| |
DIGITAL OUTPUT | 3 |
|
DIGITAL OUTPUT | 4 |
|
DIGITAL OUTPUT 5
___________________________________
R_OUT_01 | N/O▼ |
___________________________________ | |
▼▲ | |
▼▼ MORE MENUS | |
Digital Outputs Setup Screen 1
6.3.4 Analog Input
C
TM
ANALOG INPUTS SETUP
___________________________________
ANALOG INPUT 1 | ▼ | ||
ANALOG INPUT 2 |
| ||
ANALOG | INPUT | 3 |
|
ANALOG | INPUT | 4 |
|
ANALOG INPUT 5
___________________________________
AN_IN_01 | ▼ |
___________________________________ | |
▼▲ |
|
▼▼ MORE MENUS | |
Analog Inputs Setup Screen 1
Digital Input: For up to 32 configured Digital Input devices, the user may select whether an input is normally open (N/O), or normally closed (N/C).
Digital Output: For up to 10 configured Digital Output devices, the user may select whether an output is normally open (N/O), or normally closed (N/C).
For up to 20 configured Analog Input devices, the user may edit
a)Moving Average Samples. (1, 2, 4).
b)Determine Raw Count Offset, the lowest reading expected from the device.
c)Determine Raw Count Span, the span from the lowest to highest reading expected from the device.
d)Apply the appropriate Minimum engineering scale. In most cases, 0% addresses a typical application and it is the Centurion’s default value.
e)Apply the appropriate Maximum engineering scale.
In most cases, 100% addresses a typical application and it is the Centurion’s default value.