MicroNet Technology SP5052, SP5050, SP5054 user manual Greetrd command

no answer from 210.54.23.129 usr/config$ ping 192.168.4.121 PING 192.168.4.121: 56 data bytes

64bytes from 192.168.4.121: icmp_seq=0. time=5. ms

64bytes from 192.168.4.121: icmp_seq=1. time=0. ms

64bytes from 192.168.4.121: icmp_seq=2. time=0. ms

64bytes from 192.168.4.121: icmp_seq=3. time=0. ms

----192.168.4.121 PING Statistics----

4packets transmitted, 4 packets received, 0% packet loss

round-trip (ms) min/avg/max = 0/1/5

5.10 [greetrd] command

This command is for user to record their own greeting and analyze disconnect tone. If VoIP FXO gateway can’t hang up call and release line correctly, please use this function to analyze disconnect tone of PSTN side.

Greeting Voice Record : please follow instructions on screen (Selection 1). First, call in line1 of VoIP FXO gateway from PSTN side(now can’t hear greeting) and press “enter” to start record .After finishing recording, please press “enter” again to stop recording. Then choose “y/n” to replay and save or not.

usr/config$ greetrd

==================================================

Welcome to Voice Record/Analysis Mode

--------------------------------------------------

1.Greeting Voice Record. 2.Disconnect Tone Analysis. 3.exit.

--------------------------------------------------

Please input function(1~3): 1

1.Greeting Voice Record.

Please Dial-in "Line 1" and press "Enter" to start record!!!

Press "Enter" to stop record!!!

Starting record...

Stoped record!!!

New Greeting Voice Infomation

---------------------------------------

File size :	0 (K bytes)
Totally time:	8 (seconds)
Do not Hang up the phone!!
Please wait for Writing...block 0

22