MicroNet Technology SP5052, SP5050, SP5054 user manual

Page 31

-gwtype

Register as Gateway (1) or Terminal (0) type

-ras

Gatekeeper RAS port (1024~65535).

-range

Dynamically allocated port range (1500~65535).

-respto

Max waiting time for 1st response to a new call (1~200).

-connto

Max waiting time for call establishment after receiving 1st

 

response of a new call (1~20000).

Note:

H.245 port configuration is not available now.

Options -gk -e164 -alias -multi -ttl -gkfind -ras are ignored when RAS mode is configured as Peer-to-Peer mode.

Example:

h323 -gk 210.59.163.171 -e164 0 -alias fxo h323 -mode 1

Parameters Usage:

-print

print current h323 related settings

-mode

alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper

 

mode; 1=peer-to-peer mode). If users select gatekeeper mode, a

 

extra gatekeeper is need when VoIP FXO gateway is in

 

operation.

-gk

to assign gatekeeper’s IP address when VoIP FXO gateway is in

 

gatekeeper mode.

-gkname

to assign gatekeeper ID when VoIP FXO gateway is in

 

gatekeeper mode.

-dfgw

to set IP address of default gateway, this function is same as

 

Microsoft NetMeeting. To implement this feature both endpoints

 

must be under peer-to-peer mode.

 

If the other endpoint is FXO product, which have to set as

 

sysconf –2nddial 0 to make one-stage dialing. Dial in VoIP FXO

 

gateway from PSTN, when hearing greeting user can dial remote

 

PSTN number, VoIP FXO gateway will automatically dial to

 

default gateway, then default gateway will dial this number to

 

PSTN side. For example, user wants to dial from VoIP FXO

 

gateway A to ext.888 by VoIP FXO gateway B, user only have to

 

dial 888 after hearing greeting of VoIP FXO gateway A.

 

If the other endpoint is FXS product, such as SP5002 or SP5004.

 

Dial in VoIP FXO gateway from PSTN, when hearing greeting,

 

user can dial line number of VoIP FXS gateway. For

 

example ,user wants to dial from VoIP FXO gateway to SP5004,

 

the configuration of SP5004 is “h323 –line1 101 –line2 102”. User

 

can press 101 or 102 to line1 or line2 of SP5004 after hearing

 

greeting of VoIP FXO gateway.

31

Image 31
Contents User’s Manual Introduction Introduction Features and specificationGeneral Features Audio featureAppearance Management FeaturesBack panel GND Pin Name Dir DescriptionStart System Operating ProcedureTelephone Line Requirement IP Environment SettingHyper Terminal Setting System RequirementPage Page Gatekeeper Mode Initializing VoIP FXO Gateway SettingConfigure VoIP FXO gateway Password Usr/config$ h323 -mode Peer-to-Peer ModeUsr/config$ ifaddr -ip 10.1.1.1 -mask 255.2555.255.0 -gate Usr/config$ h323 -mode 0 -gk 10.2.2.2 -e164 -alias fxoFixed IP Address usr/config$ ifaddr -ipsharing 1 Usr/config$ pbook -add name TEST1 ip 10.1.1.1 e164Behind IP-Sharing Dynamic IP Address -usr/config$ ifaddr -ipsharing What is Disconnect Tone Disconnect Tone ConfigurationHow to configure disconnect tone on VoIP FXO gateway Examples how to configure Tone table Adjust Tone Table parameters manuallyThere are two ways to analyze the disconnect tone Adjust Input Tone Level Debug command Command listsHelp command Quit commandFlash command Reboot commandUsr/config$ debug -add h323 vp usr/config$ debug -open Ifaddr command Commit commandUsr/config$ time Current time is THU JAN 01 052923 Time commandPing command Usr/config$ ifaddr -sntp 1Greetrd command Exit exit this command Parameter Usages Pbook commandAutomatic sequence number as index Phonebook RulesPppoe Sysconf command$bureau Print LineToLine feature should be used together with$h323 -mode 1 peer-to-peer mode $sysconf -2nddial 1 2nddial on$bureau 192.168.4.184 Please refer to 5.21 bureau commandValue is set to enable all ports Usr/config$ sysconf -sendxcode 1 -access set1 14 h323 commandPage Usr/config$ gk Gatekeeper information and configuration Gk commandVoice command Display voice codec information and configuration Usr/config$ voice -nscng g723 Tos commandUsr/config$ voice -mindelay 90 -maxdelay 150 -optfacor Support command Tone commandGroup command Usr/config$ group -pattern 1 3 -e164 100 Bureau commandPage Rom command Prefix commandPage Passwd command Download Procedure Upgrade the VoIP FXO gatewayTFTP/FTP server Page Browse the IP Address which has predefined via RS-232 Appendix Web configurationInput the login name and password Network Interface Start configureH323 Information System Config Voice Setting For Advanced User Phone Pattern For Advanced User Page Phone Book For Peer-to-Peer mode only Type Of Service Hot Lines PPPoE Password ROM Upgrade Flash Clean Commit Data Reboot System