6. Upgrade the VoIP FXO gateway
VoIP FXO gateway supports remote download via TFTP for updating the new ROM file. Regarding new version release, please contact local distributor for more information.
TFTP/FTP server
It is necessary to prepare the TFTP/FTP server program on the host PC as TFTP/FTP server. After TFTP/FTP program set up on one PC and connecting to network, VoIP FXO gateway is ready to be updated.
Download Procedure
Associated with Chapter 5.23 [rom] command:
show versions of all rom files | ||
to update main Application program | ||
| code, Boot code, DSP testing code, DSP kernel code, or DSP | |
| application code. |
|
boot2m parameter let users to upgrade the whole system flash, | ||
| including all the firmware that mentioned above. If 2M rom file | |
| update is executed, users have to set again the MAC address | |
| of VoIP FXO gateway or it will cause conflict on Ethernet | |
| because the original MAC address is erased during 2M | |
| ROM file upgrading. |
|
Note: To set mac address please key in command setmac:(when key in MAC address ,press enter each time after key in two characters):
usr/config$ setmac
-enter mac address 00 01
a8
00
0x xx
-the mac address is 00 01 a8 00 0x xx
-if mac address is correct, please press 'y' to setup configuration, else press 'n' to continue
The greeting file can be updated by users. The attributes of | |
| sound file should complied to: |
| kb/s |
update ASKPIN sound file. This is the greeting sound that when | |
| asking for pincode. |
to specify TFTP server’s IP address when upgrading ROM files. | |
to specify the target file name, which will replace the old one. |
43