MicroNet Technology SP5054, SP5050, SP5052 user manual Pppoe, Sysconf command

5.12 [pppoe]

Display PPPoE related information.

PPPoE device information and configuration Usage:

pppoe [-print][-open][-close]

pppoe [-dev on/off][-id username][-pwd password]

-print	Display PPPoE device information.
-dev	Enable(=1) or Disable(=0) device.
-open	Open PPPoE connection.
-close	Disconnect PPPoE connection.
-id	Connection user name.
-pwd	Connection password.
-reboot	Reboot after remote host disconnection.
Paremeter Usage:
-print	print PPPoE status.
-dev	Enable PPPoE Dial-up function
-open	Open the connection
-close	Close the connection
-id	Input the User name ID provided by ISP
-pwd	Input the User name password provided by ISP
-reboot	Reboot the PPPoE connection.

5.13 [sysconf] command

This command displays the system information and configuration.

usr/config$ sysconf

System information and configuration Usage:

Sysconf [-service type] [-plan digits] [-2nddial flag] [-keypad dtmf] [-ringdet method] [-callalive flag] [-port s1 s2 s3 s4 ]

[-seizure mode] [-2nddial switch]

[-drule [in_filter str1] [in_drop str2] [in_insert str3] [out_filter str4] [out_drop str5] [out_insert str6]]

[-askpin f] [-pincode [set1 pin1] [set2 pin2] [set3 pin3] [set4 pin4]] sysconf -print

-print	Display system overall information and configuration.
-service	Specify gateway service type.
	(0: Dial in service,2: HotLine/LineToLine service.)
-ringdet	Specify gateway ring detect method. (0:For 1st hardware
version,	1:For 2st hardware version.
-plan	Number of digits for dial plan. (any positive number.)
-port	Enable/Disable individual port.

26