MicroNet Technology SP5054, SP5050 Bureau command, Usr/config$ group -pattern 1 3 -e164 100

-enable	Enable PSTN Grouping
-disable	Disable PSTN Grouping
-number	Set number of divided groups
-pattern	Set number of members in each group
-e164	Set E.164 number for each group

Example: group -print group -enable group -disable

group -number 2 -pattern 3 3 -e164 01 02 group -pattern 3 1 -e164 100 200 group -e164 11 22

Parameter Usages:

- print	display current grouping information
- enable	enable grouping function
- disable	disable grouping function
- number	set how many groups will be divided
- pattern	set how many members in each group
- e164	set e164 of each group

For example, if users need to divide VoIP FXO gateway into L1 in the 1st group, and L2 in the 2nd group, and have them register to gatekeeper separately (e164=100 for 1st group; e164=200 for 2nd group), they have to use the following command:

usr/config$ group –pattern 1 3 –e164 100 200

Note: GROUP function is effective only in gatekeeper mode.

5.21 [bureau] command

Type bureau to display the command usage.

usr/config$ bureau

Bureau line setting information and configuration Usage:

bureau [-pstn number] [-hold used] [-table [Port DestIP TELnum]] bureau -print

-print	Display Bureau line information and configuration.
-pstn	PSTN number (per port basis). This number is used to
display	as a caller ID when the caller ID is not available.
	The maximum digit length is 32.
-hold	Specify the hold tone generation (using PCM file). (On/Off)
	Setting value (On=1, Off=0).

38