CoolTherm
Manual / Bedienungsanleitung
The efficiency of heavily soiled heat exchangers is very limited these have to be cleaned regularly. Use a vacuum cleaner, compressed air or a soft brush to clean the fins.
Do not bend the fins during cleaning, because this will interfere with the correct ait flow through the unit.
Replacement of Heat Exchanger
Step 2: Remove air duct into upper direction
Step 1: Unfix cable strap of temperature sensor
Step 3: | Step 6: |
Unfix cable strap | Unfix fixing |
of humidity sensor | four screws |
and unscrew it |
|
including fixing |
|
screw. |
|
Put the sensor |
|
outside of the heat |
|
exchanger |
|
| Step 7: |
| Pull out heat |
| exchanger |
| Step 4: |
| Unfix earth |
| cable |
Step 5:
Unfix condensate connection
CoolTherm | 01_998_330_0_k | page / Seite 31/83 |