CoolTherm
Manual / Bedienungsanleitung
-Carefully bleed heat exchanger when filling the system.
-Open the air bleed valve until the coming out water is bubble free.
-Close this valve after bleeding carefully.
Air bleed valve
Chilled water return
Drain valve
Chilled water feed
-If necessary,
-After an extended period without use, and particularly in case of risk of frost, the heat exchanger and the supply pipe are to be completely drained.
-Drain completely by blowing out with compressed air and remove all bleed and drain plugs.
CoolTherm | 01_998_330_0_k | page / Seite 22/83 |