CoolTherm
Manual / Bedienungsanleitung
Heat exchanger connection
Chilled water | Chilled water |
feed | return |
The chilled water pipes should be insulated against condensation and losses using a waterproof insulation.
Insulation thickness : „F“ (9 - 12mm) λ = 0,037 W/mK (10°C)
5.4Condensed water connection
If the CoolTherm is operated below dew point, condensed water may occur. As standard there is a water connection, 5/8“ diameter, in the condensed water tray for drainage.
Preparations for connecting:
Step 1): Remove air duct
Condensat connection
Step 2.)
Remove cap
Step 3.) Connect the nipple with a drain hose 5/8”
Step 4.)
Move and click the nipple with hose into the hole
CoolTherm | 01_998_330_0_k | page / Seite 23/83 |