Network Settings
•See “Set Up Additional WAN Ports” on page
Table
Settings | Notes | Example |
|
|
|
Ether0 address | IP address of the Ether0 port on the | 192.198.32.2 |
| INA module. |
|
|
|
|
Ether0 netmask |
| 255.255.255.0 |
|
|
|
System name | Optional. | Mysystem |
|
|
|
First data channel number | The data channel number determines | 16 |
assigned to the router | the WAN port number, which is 1 (one) |
|
| less that the data channel number. For |
|
| example, if the first data channel |
|
| number is 16, all subsequent channels |
|
| are assigned to port W15. |
|
|
|
|
Default gateway |
| 192.198.32.1 |
|
|
|
Name service type | Optional. Select the Domain Name | DNS |
| System (DNS) or Network Information |
|
| Service (NIS). |
|
|
|
|
Name server address | Optional. | 192.12.35.1 |
|
|
|
WAN port address |
| 192.198.32.40 |
|
|
|
Remote router address |
| 172.12.32.2 |
|
|
|
Remote router netmask |
| 255.255.255.240 |
|
|
|
Channel rate | This value is not handled by the | 56k or 64k |
| INAWizard. Use the command line |
|
| interface or PMVision to set this value. |
|
| The default speed is 64Kbps. Almost all |
|
| installations use this default value. |
|
|
|
|
Protocol | Frame | |
| Relay. |
|
|
|
|
Data link connection identifier | For Frame Relay connections only. | LMI |
(DLCI) list source | Select Local Management Interface |
|
| (LMI) or |
|
| enter a DLCI list. |
|
|
|
|
DLCI keepalive value | For Frame Relay connections only. | 20 |
| Change the |
|
| necessary, to match the value on the |
|
| Frame Relay switch. Contact your telco |
|
| for more information. |
|
|
|
|
Getting Ready for Configuration |