Lucent Technologies Network Access Module 16172.26.131.37, 192.198.32.17, Hours, 192.198.32.33

Network Settings

Table 2-2Basic Network Configuration Settings for the INA Module (Continued)

Settings	Notes	Example
DLCI list	For Frame Relay connections for which	16:172.26.131.37
	you manually enter a list. Enter each
	DLCI number (1 to 1023), a colon (:),
	and the IP address of the router
	represented by the DLCI.
Dynamic Host Connection	If you use DHCP. Defaults to Ether0.	192.198.32.17
Protocol (DHCP) server
address
DHCP lease time	For DHCP dynamically assigned IP	8 hours
	addresses. Enter hours and/or minutes.
	A 0 (zero) indicates an infinite time.
DHCP static binding IP	For DHCP statically assigned IP	192.198.32.33
address(es) and corresponding	addresses. Enter each IP address and	00:c0:d5:d4:da:2c
media access control (MAC)	the 12-digit hexadecimal MAC address
address(es)	of the host to which it is assigned.
DHCP address pool start	For DHCP dynamically assigned IP	192.198.32.65
address	addresses. Enter one address or the first
	in each address range.
DHCP address pool end	Enter the last address in the range.	192.198.32.127
address
Network address translator	If you use NAT static maps. Enter each	192.198.32.22
(NAT) secure address and	secure internal (private) IP address and	172.18.1.1
corresponding nonsecure	the nonsecure external (global) IP
address	address to which you want it mapped.
NAT base IP address	For a NAT dynamic address pool. Enter	192.198.32.2
	one nonsecure external (global) IP
	address or the first address in a range.
NAT pool size	For a NAT address pool range. Enter a	64
	number of IP addresses up to 64.

2-4 INA Module Installation and Configuration Guide