Lucent Technologies Network Access Module manual Hour Event Totals, INA ModuleMaintenance Options

INA Module￿Maintenance Options

Note – The additional error event counts are cleared whenever the INA module is reset. Be sure to view the error events before resetting the module or busying out the module.

From your system programming console, use the following sequence to access the INA module Error Events screen. Be sure to select the corresponding INA module slot number.

Menu: Maintenance→ Slot→ Slot#→ Enter→ Error Events

The Current Hour and Previous Hour error event screens that are also used on the 100D module are available on the INA module. Clearing the new error event counts does not affect the Current Hour and Previous Hour error event counts. Because the Current Hour and Previous Hour statistics are computed with a different algorithm, Current Hour and Previous Hour counts do not match the newer counts.

24 Hour Event Totals

The 24-hour total error event screen reports cumulative error statistics spanning the past 24 hours. The current event totals are not included in this report. From your system programming console, use the following sequence to access the INA 24 Hr Total screen. Be sure to select the corresponding INA module slot number.

Menu: Maintenance→ Slot→ Slot#→ Enter→ Error Events→ 24 hr total

This screen provides statistics related to the health of the T1/PRI interface. These statistics are summarized in Table C-3.

Table C-324-Hour Total Error Line Items

Item	Description
24 Hour Slot xx	xx is the slot currently being reported on.
nn Valid	nn is the number of valid historical 15-minute
Intervals	intervals from the past 24 hours. A valid historical
	interval is one for which data has been captured while
	the system was running. During a valid interval, data
	has not been lost due to a clearing of error events or a
	board reset. A board reset can occur during a reset,
	busy-out, frigid start, cold start or power outage.
MIS	Misframes.
SLP	Slips.
ES	Errored Seconds.
BS	Bursty errored seconds.
SEC	Severely errored seconds.
FS	Failed seconds.
BPV	Bipolar violations.

C-4 INA Module Installation and Configuration Guide