Lantronix UDS1100 manual Connect Mode Active Connection, Endpoint Configuration, Common Options

Page 31

 

 

4: Configuration Using Web-Manager

 

Connect Mode: Active Connection

 

 

 

 

Active Connect

Select None (default) to disable Active Connect. Otherwise,

 

 

indicate the connection type from the drop-down list:

 

 

‹ With Any Character: Attempts to connect when any

 

 

character is received from the serial port.

 

 

‹ With Active Mdm Ctrl In: Accepts external

 

 

connection requests only when the

 

 

modem_control_in input is asserted.

 

 

‹ With Start Character: Attempts to connect when it

 

 

receives a specific start character from the serial

 

 

port. The default start character is carriage return.

 

 

‹ Manual Connection: Attempts to connect when

 

 

directed by a command string received from the

 

 

serial port.

 

 

‹ Auto Start: Automatically connects to the remote IP

 

 

address and port after booting up.

 

 

 

 

Start Character

If Active Connect is set to With Start Character, enter the

 

 

start character in this field. The default setting is 0D.

 

 

 

 

Modem Mode

Indicates the on-screen response type when in Modem Mode

 

 

(if Modem Mode is enabled). The default setting is None.

 

 

 

 

Endpoint Configuration

 

 

 

 

 

 

Local Port

Enter the local port number.

 

 

 

 

Auto increment for active

Select to auto-increment the local port number for new

 

connect

outgoing connections. The range of auto-incremented port

 

 

numbers is 50,000 to 59,999 and loops back to the beginning

 

 

when the maximum range is reached. Disabled by default.

 

 

 

 

Remote Port

Enter the remote port number.

 

 

 

 

Remote Host

Enter the IP address of the remote device.

 

 

 

 

Common Options

 

 

 

 

 

 

Telnet Mode

This field is available for configuration only when Active

 

 

Connect is set to None. Select Enable to permit Telnet

 

 

communication to the UDS1100 unit.

 

 

 

 

Terminal Name

This field is available for configuration only when Telnet Mode

 

 

is set to Enable.

 

 

Use the terminal name for the Telnet terminal type. Enter only

 

 

one name. When this option is enabled, the unit also reacts to

 

 

the end of record (EOR) and binary options, which can be

 

 

used for applications such as terminal emulation to IBM hosts.

 

 

 

 

Connect Response

A single character is transmitted to the serial port when there

 

 

is a change in connection state. The default setting is None.

 

 

 

 

UDS1100 User Guide

31

Image 31
Contents UDS1100 User Guide Date Rev Comments 900-417 Copyright & TrademarkContacts RevisionsContents Setup Mode Server Configuration Troubleshooting and Contact Information Tables ContentsPurpose and Audience Using This GuideChapter Summary Additional Documentation Using This GuideApplications IntroductionApplication Examples Introduction Configuration Methods Additional FeaturesProtocol Support Sample Hardware Address Product Information LabelGetting Started Package ContentsTo install the unit Installing the UDSIP Address Subnet Mask Gateway Required InformationHardware Address IP AddressSelect Assign a specific IP address and click Next Assigning the IP Address DeviceInstallerInstalling DeviceInstaller Assigning an IP AddressAdding the Unit to the Manage List Accessing the UDS1100 Using DeviceInstallerViewing the Current Configuration To view the units current settingsIP Address on Next Step Assigning the IP Address Serial Port LoginGetting Started Accessing UDS1100 Using DeviceInstaller Configuration Using Web-ManagerLantronix Web-Manager Network ConfigurationStatic IP Address Configuration Automatic IP Address ConfigurationEthernet Configuration Server ConfigurationTo specify how data will be transmitted Server Configuration To configure the UDS1100’s device server settingsAdvanced To configure the host list Host List ConfigurationRetry Settings Host Information Channel 1 ConfigurationSerial Settings To configure the channel’s serial settingsChannel Port SettingsPack Control Flush Output Buffer Network to Serial Connection Settings TCPTo configure a channel’s TCP settings Flush Input Buffer Serial to NetworkConnect Protocol Connect Mode Passive ConnectionEndpoint Configuration Connect Mode Active ConnectionCommon Options Disconnect Mode Connection Settings UDPTo configure a channel’s UDP settings UDP Connection Settings Datagram ModeApply Factory Defaults Apply SettingsTo establish a Telnet connection Configuration via Telnet or Serial Port Setup ModeAccessing Setup Mode Telnet ConnectionTo exit setup mode Exiting Setup ModeSerial Port Connection Set Gateway IP Address Setup Mode Server ConfigurationServer Configuration Option IP AddressNetwork Class Host Bits Netmask Change Telnet Configuration PasswordNetmask Number of Bits for Host Part Dhcp NameSetup Mode Server Configuration Channel 1 Option Setup Mode Channel ConfigurationBaudrate Flow Interface ModeMode Option Common I/F Mode Setting BinaryPort Numbers Reserved for Connect ModePort Number Flow Control Option HexIncoming Connection Connect Mode OptionActive Startup ResponseManual Connection Address Example To enable the hostlist Modem ModeDatagram Type No Carrier MessageMeaningATD Modem Mode Function CommandRemote Port Send the Escape Sequence +++ in Modem ModeAuto Increment Source Port Remote IP AddressDisconnect Mode Option Flush Mode Buffer FlushingOption Pack ControlTrailing Characters DisConnTime Inactivity TimeoutSend Characters Packing IntervalTelnet Terminal Type Channel Port PasswordExpert Settings Option Setup Mode Advanced SettingsTCP Keepalive time in seconds Http Port Number ARP Cache timeout in secondsDisable Monitor Mode at bootup Enable alternate MACSnmp Community Name Security Settings OptionDisable Snmp Disable Telnet SetupDisable Web Setup Disable Tftp Firmware UpdateDisable Port 77FE Hex Disable Web ServerSecurity Settings Defaults Default Settings OptionChannel 1 Configuration Defaults Expert Settings DefaultsSetup Mode Advanced Settings ROM File Firmware UpgradesUsing Tftp Graphical User Interface Obtaining Firmware Reloading FirmwareTo recover firmware Using Tftp Command Line InterfaceFirmware Upgrades Monitor Mode Commands Monitor ModeEntering Monitor Mode Using the Serial Port Entering Monitor Mode Using the Network PortResponse Meaning Command Command Name FunctionLEDs Troubleshooting and Contact InformationProblem/Message Reason Solution Problems and Error MessagesLock on Technical Support Europe, Middle East, and Africa Technical SupportConnections and Pinouts Serial Connector PinoutsSerial Port Modem Cable DB25 Female Interface RS422 4 wire modeNull Modem Cable Lantronix Part No Network PortPower Plug Ethernet Connector PinoutsCategory Description Technical SpecificationsTechnical Specifications AutoIP Alternative Ways to Assign an IP AddressTo assign a temporary IP address ARP and TelnetConversion Table Converting Binary to HexadecimalDecimal Binary Hex Scientific Calculator Warranty Compliance and Disclaimer Disclaimer and Supplementary Information Index UDS1100 User Guide