access, or slow connection speed. If you really need to add a telephone set before the splitter, you must add a micro filter before a telephone set. Do not connect several telephones before the splitter or connect several telephones with the micro filter.
Step 4. Check the ADSL LED status
Please check the ADSL LED on the front panel. This light indicates the status of your ADSL broadband through your telephone line. If the light is on, you can continue setup. However if the light is flashing, there is no broadband line detected. Please call your Internet Service Provider (ISP) and inform them about the flashing ADSL light to resolve the issue.
Step 5. Firewall settings
Please turn off all personal firewalls before you continue the setup – firewalls can block communication between your PC and router.
Note: You must use the power adapter included in the package with the router, do NOT attempt to use a
Step 6: PC LAN IP configuration
Configure your PC’s LAN settings to automatically obtain an IP address from the router by following the steps below:
1.Click “Start” and then select “Control Panel”.
11