Edimax Technology AR-7211B V2 manual 2 MER/1483 Routed

Page 36

Field

Description

connection.

Manual: Dial up and disconnect the connection mannually.

5.2.2.1483 MER/1483 Routed

Note: The settings for 1483 Routed and 1483 MER connection types are the same.

Set the encapsulation mode to LLC/SNAP and click Next to continue:

	Field		Description
	Obtain an IP address		When this is selected, DHCP assigns IP address
	automatically		for the PPPoE connection.
	Use the following IP address		When this is selected, you need to enter an IP
		36

Image 36

Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Package Contents Safety PrecautionsSystem Requirements LED & Button Definitions AdslLAN Features  Napt DNS  DMZConfiguration Connect the Adsl lineConnect the router to your LAN network No telephone before the splitter Firewall settings PC LAN IP configurationCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterInternet Connection Field DescriptionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Field Description LAN Interface Setup LAN IP192.168.2.1 Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticNetwork ARPLAN IP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfCurrent Allowed MAC Address Table can access Field Description Duplex,Auto NegotiationMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA PPP Settings WAN IP SettingsOn Demand or Manual PVC into the Current ATM VC Table ATM VCC VPI/VCIIf you choose Connect on Demand Bridged PPPoE or Disable Bridge MaccloneAuto PVC ATM Settings CBR, nrt-VBR or rt-VBRPCR Adsl Settings CdvtSCR MBSService DNSDdns DynDNS.org or TZOFirewall 2.1. IP/Port FilterMAC Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069URL ACSConnection Request Debug ACLTo the Current ACL Table You can choose Interface or IP Address Advanced RoutingStatic Route RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQYou can choose Normal Service, Minimize Cost Minimize DelayMaximize Reliability, Maximize Throughput, or SnmpField Description Client Limit OthersAdmin Commit/Reboot Restore to the factory default configuration UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimeDiagnostic PingPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity