Edimax Technology AR-7211B V2 manual Lan

Internet	Green	ON	Internet connected in router mode
		BLINK	Internet activity (transferring/receiving data) in
			router mode
		OFF	Device in bridged mode
	Red	ON	Internet not connected in router mode
			(Please refer to Note 2)
LAN	Green	ON	LAN port connected
		BLINK	LAN activity (transferring/receiving data)
		OFF	LAN port not connected

Note:

1)If the ADSL LED is off, please check your Internet connection. Refer to A . Hardware Installation for more information about how to connect the router correctly. If all connections are correct, please contact your ISP to check if there is a problem with your Internet service.

2)If the Internet LED is red, please check your ADSL LED first. If your ADSL LED is off, refer to Note 1. If the green ADSL LED is ON, please check your Internet configuration. You may need to check with your ISP that your Internet is configured correctly.

Rear Panel

	Figure 2
Items	Description
	Power ON/OFF
5V	Power connector
LAN	Ethernet RJ-45 port
Reset	Resets device to factory defaults (to reset to factory defaults, push a paper clip into
	the hole when the device is powered and hold for more than 10 seconds)
Line	Line RJ-11 port

7