Edimax Technology AR-7211B V2 manual Rip

Page 68

Field

Description

 

delete the row.

Show Routes

Clicking “Show Routes” will display the IP Route Table.

 

You can view a list of destination routes commonly

 

accessed by your network.

Static Route Table

A list of the previously configured static IP routes.

Clicking Show Routes will display the following page - the table shows a list of destination routes commonly accessed by your network.

5.6.1.2. RIP

Click RIP in the left pane and the page shown in the following figure will appear. If you are using this device as an RIP-enabled router to communicate with others using Routing Information Protocol (RIP) - enable RIP. This page is used to select the interfaces on your devices which use RIP, and the version of the protocol used.

68

Image 68
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions LED & Button Definitions AdslLAN Features  Napt DNS  DMZConnect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterInternet Connection Field DescriptionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Field Description LAN Interface Setup LAN IP192.168.2.1 Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticLAN IP NetworkARP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfCurrent Allowed MAC Address Table can access Field Description Duplex,Auto NegotiationMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR Adsl Settings CdvtSCR MBSService DNSDdns DynDNS.org or TZOMAC Filter Firewall2.1. IP/Port Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069Connection Request URLACS Debug ACLTo the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQYou can choose Normal Service, Minimize Cost Minimize DelayMaximize Reliability, Maximize Throughput, or SnmpField Description Client Limit OthersAdmin Commit/Reboot Restore to the factory default configuration UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimeDiagnostic PingPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity