Edimax Technology AR-7211B V2 manual If set to Dhcp Relay, the router acts a surrogate Dhcp

Page 47

In the DHCP Mode field, if you select None you will see the following page:

In the DHCP Mode field, if you select DHCP Relay you will see the following page:

Field

Description

 

If set to DHCP Relay, the router acts a surrogate DHCP

DHCP Mode

Server and relays the DHCP requests and responses

 

between the remote server and the client.

Relay Server

Enter the DHCP server address provided by your ISP.

Apply Changes

Click it to save the settings of this page.

Reset

Click it to refresh this page.

47

Image 47
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions Adsl LED & Button DefinitionsLAN  DMZ Features Napt  DNSConnect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationVCI Internet ConnectionField Description VPIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Dhcp Server Field Description LAN Interface SetupLAN IP 192.168.2.1Device Info StatusWAN LANAdsl Statistic StatisticsLAN IP NetworkARP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfCurrent Allowed MAC Address Table Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation MACField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR MBS Adsl SettingsCdvt SCRDNS ServiceDynDNS.org or TZO DdnsMAC Filter Firewall2.1. IP/Port Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyConnection Request URLACS ACL DebugTo the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedSnmp You can choose Normal Service, Minimize CostMinimize Delay Maximize Reliability, Maximize Throughput, orField Description Others Client LimitUpdate AdminCommit/Reboot  Restore to the factory default configurationBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationTraceroute DiagnosticPing PingOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity