Edimax Technology AR-7211B V2 manual Field Description LAN Interface Setup, Lan Ip, 192.168.2.1

Page 38

 

Field

 

 

Description

 

 

 

 

 

 

 

 

LAN Interface Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter the IP address of the LAN interface. Its

 

 

LAN IP

 

 

valid value is in the range of 192.168.2.1 to

 

 

 

 

192.168.255.254. The default IP address is

 

 

 

 

 

 

 

 

 

192.168.2.1.

 

 

 

 

 

 

 

 

 

 

 

Enter the subnet mask of the LAN interface.

 

 

LAN Netmask

 

 

Its valid value is in the range of 255.255.0.0 to

 

 

 

 

255.255.255.254.

 

 

 

 

 

 

 

 

 

 

 

Check this box to enable the secondary LAN

 

 

Enable Secondary IP

 

 

IP. The two LAN IP addresses must be in the

 

 

 

 

 

different networks.

 

 

 

 

 

 

 

 

DHCP Server

 

 

 

 

 

 

 

 

 

 

 

Enable DHCP Server

 

 

Check this box to enable DHCP server.

 

 

 

 

 

 

 

 

Start IP

 

 

Enter the start IP address that the DHCP sever

 

 

 

 

assigns.

 

 

 

 

 

 

 

 

 

 

 

 

 

End IP

 

 

Enter the end IP address that the DHCP server

 

 

 

 

assigns.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lease time determines the period that the

 

 

Max Lease Time

 

 

PCs retain the assigned IP addresses before

 

 

 

 

 

the IP addresses change.

 

 

 

 

 

 

 

Click Next to continue to the next page:

38

Image 38
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions LED & Button Definitions AdslLAN  DNS Features Napt  DMZConnect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterVPI Internet ConnectionField Description VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged 192.168.2.1 Field Description LAN Interface SetupLAN IP Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticLAN IP NetworkARP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfMAC Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR SCR Adsl SettingsCdvt MBSService DNSDdns DynDNS.org or TZOMAC Filter Firewall2.1. IP/Port Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069Connection Request URLACS Debug ACLTo the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQMaximize Reliability, Maximize Throughput, or You can choose Normal Service, Minimize CostMinimize Delay SnmpField Description Client Limit Others Restore to the factory default configuration AdminCommit/Reboot UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimePing DiagnosticPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity