Edimax Technology AR-7211B V2 manual LED & Button Definitions, Adsl

Page 6

Do not put this device close to heat sources or high temperatures. Keep the device out of direct sunshine.

Do not put this device close to a place where it is damp or wet. Do not spill any fluid on this device.

Do not connect this device to any PCs or electronic products, other than those which you are instructed or recommended to do so in the product’s documentation, by our customer engineers or by your broadband provider – connecting to incorrect devices may cause a fire risk.

Place this device on a stable surface.

1.4.LED & Button Definitions

Front Panel

 

 

 

 

 

Figure 1

 

 

 

 

 

 

 

 

LEDs

Color

Status

 

Description

 

 

 

Green

ON

 

Powered on

 

 

 

 

OFF

 

Powered off

 

 

 

Red

ON

 

ADSL broadband initial self-test failed or upgrading

 

 

 

 

 

 

firmware

 

 

ADSL

Green

ON

 

ADSL line is synchronized and ready to use

 

 

 

 

SLOW

 

ADSL synchronization failed ( Please refer to Note

 

 

 

 

BLINK

 

1)

 

 

 

 

FAST BLINK

 

ADSL negotiation is in progress.

 

 

 

 

 

6

 

Image 6
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Package Contents Safety PrecautionsSystem Requirements LED & Button Definitions AdslLAN  DNS Features Napt  DMZConfiguration Connect the Adsl lineConnect the router to your LAN network No telephone before the splitter Firewall settings PC LAN IP configurationCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterVPI Internet ConnectionField Description VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged 192.168.2.1 Field Description LAN Interface SetupLAN IP Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticNetwork ARPLAN IP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfMAC Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA PPP Settings WAN IP SettingsOn Demand or Manual PVC into the Current ATM VC Table ATM VCC VPI/VCIIf you choose Connect on Demand Bridged PPPoE or Disable Bridge MaccloneAuto PVC ATM Settings CBR, nrt-VBR or rt-VBRPCR SCR Adsl SettingsCdvt MBSService DNSDdns DynDNS.org or TZOFirewall 2.1. IP/Port FilterMAC Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069URL ACSConnection Request Debug ACLTo the Current ACL Table You can choose Interface or IP Address Advanced RoutingStatic Route RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQMaximize Reliability, Maximize Throughput, or You can choose Normal Service, Minimize CostMinimize Delay SnmpField Description Client Limit Others Restore to the factory default configuration AdminCommit/Reboot UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimePing DiagnosticPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity