Edimax Technology AR-7211B V2 manual Web Configuration, Accessing the Router

Page 32

5. Web Configuration

The router can also be configured using the web-based configuration interface. Follow the instructions below.

5.1. Accessing the Router

To access the web-based configuration interface:

1.Open the Internet Explorer (IE) browser and enter http://192.168.2.1.

2.In the Login page that is displayed, enter the username and password.

The username and password of the super user are admin and 1234.

The username and password of a common user are user and user.

If you log in as a super user, the following page will appear. You can check, configure and modify all settings.

32

Image 32

Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions LED & Button Definitions AdslLAN Features  Napt DNS  DMZConnect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterInternet Connection Field DescriptionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Field Description LAN Interface Setup LAN IP192.168.2.1 Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticLAN IP NetworkARP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfCurrent Allowed MAC Address Table can access Field Description Duplex,Auto NegotiationMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR Adsl Settings CdvtSCR MBSService DNSDdns DynDNS.org or TZOMAC Filter Firewall2.1. IP/Port Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069Connection Request URLACS Debug ACLTo the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQYou can choose Normal Service, Minimize Cost Minimize DelayMaximize Reliability, Maximize Throughput, or SnmpField Description Client Limit OthersAdmin Commit/Reboot Restore to the factory default configuration UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimeDiagnostic PingPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity