Edimax Technology AR-7211B V2 manual Routing NAT IP QoS Snmp Others

Page 4

5.6.	ADVANCED	67
	5.6.1. Routing	67
	5.6.2. NAT	69
	5.6.3. IP QoS	75
	5.6.4. SNMP	77
	5.6.5. Others	78
5.7.	ADMIN	80
	5.7.1. Commit/Reboot	80
	5.7.2. Update	80
	5.7.3. Log	82
	5.7.4. Password	82
	5.7.5. Time	83
5.8.	DIAGNOSTIC	84
	5.8.1. Ping	84
	5.8.2. Traceroute	84
	5.8.3. OAM Loopback	85
	5.8.4. ADSL Statistics	86
	5.8.5. Diag-Test	86
5.9.	TROUBLE SHOOTING	87

Note: The images/screenshots used in this manual are for reference only – actual screens may vary according to firmware version. The contents of this manual are based on the most recent firmware version at the time of writing.

4

Image 4

Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Safety Precautions Package ContentsSystem Requirements LED & Button Definitions AdslLAN Features  Napt DNS  DMZConnect the Adsl line ConfigurationConnect the router to your LAN network No telephone before the splitter PC LAN IP configuration Firewall settingsCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XPWindows Vista Windows XP Page EZmax Setup Wizard Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the RouterInternet Connection Field DescriptionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Field Description LAN Interface Setup LAN IP192.168.2.1 Dhcp ServerStatus Device InfoLAN WANStatistics Adsl StatisticARP NetworkLAN IP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/HalfCurrent Allowed MAC Address Table can access Field Description Duplex,Auto NegotiationMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WANMER, PPPoE, PPPoA, 1483 Routed or IPoA WAN IP Settings PPP SettingsOn Demand or Manual PVC into the Current ATM VC Table VPI/VCI ATM VCCIf you choose Connect on Demand Macclone Bridged PPPoE or Disable BridgeAuto PVC CBR, nrt-VBR or rt-VBR ATM SettingsPCR Adsl Settings CdvtSCR MBSService DNSDdns DynDNS.org or TZO2.1. IP/Port Filter FirewallMAC Filter URL Filter Anti-DoS Software ForbiddenUpnp Igmp Proxy TR-069ACS URLConnection Request Debug ACLTo the Current ACL Table You can choose Interface or IP Address Routing AdvancedStatic Route RIP RIP NAT If User-defined Service Name is selected, you Virtual ServerNAT Forwarding NAT ALGNAT Exclude IP Port TriggerFTP ALG Port 2.8 NAT IP MappingIP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQYou can choose Normal Service, Minimize Cost Minimize DelayMaximize Reliability, Maximize Throughput, or SnmpField Description Client Limit OthersAdmin Commit/Reboot Restore to the factory default configuration UpdateUpgrade Firmware Backup/RestorePassword LogNTP Configuration TimeDiagnostic PingPing TracerouteDscp OAM LoopbackAdsl Statistics Diag-TestTrouble Shooting 255.255.255.0, respectivelyDeclaration of Conformity