Edimax Technology AR-7211B V2 manual Bridged PPPoE or Disable Bridge, Macclone, Auto PVC

Page 53

Field	Description

Bridge	You can select Bridged Ethernet,
	Bridged PPPoE or Disable Bridge.

AC-Name	The accessed equipment type.

Service-Name	The service name is displayed here.

802.1q	You can select Disable or Enable. If
	enabled, you need to enter the VLAN
	ID. The value ranges from 0 to 4095.

Apply Changes	Click to save the settings of this page
	temporarily.

Return	Click to return to the Channel
	Configuration page.

Undo	Click to refresh this page.

Source Mac address	The MAC address you want to clone.

MACCLONE	Click it to enable the MAC Clone
	function with the MAC address that
	is configured.

5.4.2.2. Auto PVC

Selecting Auto PVC in the left pane will bring you to the following page. Here, you can configure auto PVC detection by adding or deleting items to the auto PVC search table.

53

Image 53

Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions Adsl LED & Button DefinitionsLAN  Napt Features DNS  DMZConnect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationField Description Internet ConnectionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged LAN IP Field Description LAN Interface Setup192.168.2.1 Dhcp ServerDevice Info StatusWAN LANAdsl Statistic StatisticsLAN IP NetworkARP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfField Description Duplex,Auto Negotiation Current Allowed MAC Address Table can accessMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR Cdvt Adsl SettingsSCR MBSDNS ServiceDynDNS.org or TZO DdnsMAC Filter Firewall2.1. IP/Port Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyConnection Request URLACS ACL DebugTo the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedMinimize Delay You can choose Normal Service, Minimize CostMaximize Reliability, Maximize Throughput, or SnmpField Description Others Client LimitCommit/Reboot Admin Restore to the factory default configuration UpdateBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationPing DiagnosticPing TracerouteOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity