Edimax Technology AR-7211B V2 manual Downlist100Mbps/FullDuplex,100Mbps/Half

Page 43

 

 

Field

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter the IP address of LAN interface. It is

 

 

 

IP Address

 

 

recommended to use an address from a block that is

 

 

 

 

 

reserved for private use. This address block is

 

 

 

 

 

 

 

 

 

 

 

192.168.2.1- 192.168.255.254.

 

 

 

 

 

 

 

 

 

 

Subnet Mask

 

 

Enter the subnet mask of LAN interface. The range of

 

 

 

 

 

subnet mask is from 255.255.0.0-255.255.255.254.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select this to enable the secondary LAN IP address.

 

 

 

Secondary IP

 

 

The two LAN IP addresses must be in the different

 

 

 

 

 

 

networks.

 

 

 

 

 

 

 

 

 

 

LAN Port

 

 

You can choose the LAN interface you want to

 

 

 

 

 

configure.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Link

 

 

You can select the following modes from the drop-

 

 

 

Speed/Duplex

 

 

downlist:100Mbps/FullDuplex,100Mbps/Half

 

 

 

Mode

 

 

Duplex,10Mbps/FullDuplex,10Mbps/Half

 

 

 

 

 

 

 

 

 

 

43

 

Page 42 Page 44
Image 43
Page 42 Page 44
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Safety Precautions Package ContentsSystem Requirements Adsl LED & Button DefinitionsLAN  DMZ Features Napt  DNSConnect the Adsl line ConfigurationConnect the router to your LAN network No telephone before the splitter PC LAN IP configuration Firewall settingsCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationVCI Internet ConnectionField Description VPIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Dhcp Server Field Description LAN Interface SetupLAN IP 192.168.2.1Device Info StatusWAN LANAdsl Statistic StatisticsARP NetworkLAN IP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfCurrent Allowed MAC Address Table Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation MACField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA WAN IP Settings PPP SettingsOn Demand or Manual PVC into the Current ATM VC Table VPI/VCI ATM VCCIf you choose Connect on Demand Macclone Bridged PPPoE or Disable BridgeAuto PVC CBR, nrt-VBR or rt-VBR ATM SettingsPCR MBS Adsl SettingsCdvt SCRDNS ServiceDynDNS.org or TZO Ddns2.1. IP/Port Filter FirewallMAC Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyACS URLConnection Request ACL DebugTo the Current ACL Table You can choose Interface or IP Address Routing AdvancedStatic Route RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedSnmp You can choose Normal Service, Minimize CostMinimize Delay Maximize Reliability, Maximize Throughput, orField Description Others Client LimitUpdate AdminCommit/Reboot  Restore to the factory default configurationBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationTraceroute DiagnosticPing PingOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity
Top Page Image Contents