Edimax Technology AR-7211B V2 manual Upgrade Firmware, Backup/Restore

Page 81

5.7.2.1. Upgrade Firmware

Click Upgrade Firmware in the left pane, and you will see the following page. Here, you can upgrade the firmware of the router.

 

Field

 

 

Description

 

 

Select File

 

 

Click Browse to select the firmware file.

 

 

Upload

 

 

After selecting the firmware file, click Upload to

 

 

 

 

starting upgrading the firmware file.

 

 

 

 

 

 

 

Reset

 

 

Click to starting selecting the firmware file.

 

5.7.2.2. Backup/Restore

Click Backup/Restore in the left pane, and you will see the following page. You can backup the current settings to a file or restore the settings to a previously saved file.

 

 

Field

 

 

Description

 

 

 

Save Settings to File

 

 

Click here and select the location to save the

 

 

 

 

 

configuration file of the router.

 

 

 

 

 

 

 

 

 

Load Settings from File

 

 

Click Browse to select the configuration file.

 

 

 

Upload

 

 

After selecting the configuration file, click Upload to

 

 

 

 

 

start uploading the configuration file of the router.

 

 

 

 

 

 

 

 

 

 

81

 

Image 81
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Package Contents Safety PrecautionsSystem Requirements Adsl LED & Button DefinitionsLAN  Napt Features DNS  DMZConfiguration Connect the Adsl lineConnect the router to your LAN network No telephone before the splitter Firewall settings PC LAN IP configurationCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationField Description Internet ConnectionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged LAN IP Field Description LAN Interface Setup192.168.2.1 Dhcp ServerDevice Info StatusWAN LANAdsl Statistic StatisticsNetwork ARPLAN IP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfField Description Duplex,Auto Negotiation Current Allowed MAC Address Table can accessMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA PPP Settings WAN IP SettingsOn Demand or Manual PVC into the Current ATM VC Table ATM VCC VPI/VCIIf you choose Connect on Demand Bridged PPPoE or Disable Bridge MaccloneAuto PVC ATM Settings CBR, nrt-VBR or rt-VBRPCR Cdvt Adsl SettingsSCR MBSDNS ServiceDynDNS.org or TZO DdnsFirewall 2.1. IP/Port FilterMAC Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyURL ACSConnection Request ACL DebugTo the Current ACL Table You can choose Interface or IP Address Advanced RoutingStatic Route RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedMinimize Delay You can choose Normal Service, Minimize CostMaximize Reliability, Maximize Throughput, or SnmpField Description Others Client LimitCommit/Reboot Admin Restore to the factory default configuration UpdateBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationPing DiagnosticPing TracerouteOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity