Edimax Technology AR-7211B V2 manual Cdvt, Scr, Mbs, Adsl Settings

Page 55

Field	Description

	ATM network. Its value ranges from 1 to 65535.

CDVT	Cell delay variation tolerance (CDVT) is the amount
	of delay permitted between ATM cells (in
	microseconds). Its value ranges from 0 to
	4294967295.

SCR	Sustain cell rate (SCR) is the maximum rate that
	traffic can pass over a PVC without the risk of cell
	loss. Its value ranges from 0 to 65535.

MBS	Maximum burst size (MBS) is the maximum
	number of cells that can be transmitted at the PCR.
	Its value ranges from 0 to 65535.

5.4.2.4. ADSL Settings

Click ADSL Settings in the left pane, and you will see the following page. In this page, you can select the DSL modulation. Mostly, it is recommended that you do not alter the default factory default settings. The router supports the following modulations: G.Lite, G.Dmt, T1.413, ADSL2, ADSL2+, AnnexL, and AnnexM. The router negotiates the modulation modes with the DSLAM.

55

Image 55

Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Safety Precautions Package ContentsSystem Requirements Adsl LED & Button DefinitionsLAN  DMZ Features Napt  DNSConnect the Adsl line ConfigurationConnect the router to your LAN network No telephone before the splitter PC LAN IP configuration Firewall settingsCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationVCI Internet ConnectionField Description VPIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Dhcp Server Field Description LAN Interface SetupLAN IP 192.168.2.1Device Info StatusWAN LANAdsl Statistic StatisticsARP NetworkLAN IP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfCurrent Allowed MAC Address Table Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation MACField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA WAN IP Settings PPP SettingsOn Demand or Manual PVC into the Current ATM VC Table VPI/VCI ATM VCCIf you choose Connect on Demand Macclone Bridged PPPoE or Disable BridgeAuto PVC CBR, nrt-VBR or rt-VBR ATM SettingsPCR MBS Adsl SettingsCdvt SCRDNS ServiceDynDNS.org or TZO Ddns2.1. IP/Port Filter FirewallMAC Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyACS URLConnection Request ACL DebugTo the Current ACL Table You can choose Interface or IP Address Routing AdvancedStatic Route RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedSnmp You can choose Normal Service, Minimize CostMinimize Delay Maximize Reliability, Maximize Throughput, orField Description Others Client LimitUpdate AdminCommit/Reboot  Restore to the factory default configurationBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationTraceroute DiagnosticPing PingOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity