Edimax Technology AR-7211B V2 manual Bridged

Page 37

 

Field

 

Description

 

 

 

address, subnet mask and default gateway for the

 

 

 

WAN connection, which is provided by your ISP.

 

Obtain DNS server addresses

 

When selected, DHCP automatically assigns DNS

 

automatically

 

server address.

 

Use the following DNS server

 

When selected, you need to manually enter the

 

 

primary DNS server address and secondary DNS

 

addresses

 

server address.

 

 

 

 

 

 

Check this box to enable network address

 

 

 

translation (NAT). If you do not select it and wish

 

Enable NAT

 

to access the Internet normally, you must add a

 

 

 

route on the uplink equipment. Usually, it is

 

 

 

required to enable NAT.

 

5.2.3. 1483 Bridged

 

 

Set the encapsulation mode to LLC/SNAP and click Next to continue:

37

Image 37
Contents AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others Safety Precautions Package ContentsSystem Requirements Adsl LED & Button DefinitionsLAN  Napt Features DNS  DMZConnect the Adsl line ConfigurationConnect the router to your LAN network No telephone before the splitter PC LAN IP configuration Firewall settingsCheck the Adsl LED status Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP WindowsWindows Vista Windows XP Page Setup Wizard EZmax Setup WizardPlease select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web ConfigurationField Description Internet ConnectionVPI VCIPPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged LAN IP Field Description LAN Interface Setup192.168.2.1 Dhcp ServerDevice Info StatusWAN LANAdsl Statistic StatisticsARP NetworkLAN IP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/HalfField Description Duplex,Auto Negotiation Current Allowed MAC Address Table can accessMAC Current Allowed MAC Address TableField Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IPMER, PPPoE, PPPoA, 1483 Routed or IPoA WAN IP Settings PPP SettingsOn Demand or Manual PVC into the Current ATM VC Table VPI/VCI ATM VCCIf you choose Connect on Demand Macclone Bridged PPPoE or Disable BridgeAuto PVC CBR, nrt-VBR or rt-VBR ATM SettingsPCR Cdvt Adsl SettingsSCR MBSDNS ServiceDynDNS.org or TZO Ddns2.1. IP/Port Filter FirewallMAC Filter URL Filter Software Forbidden Anti-DoSUpnp TR-069 Igmp ProxyACS URLConnection Request ACL DebugTo the Current ACL Table You can choose Interface or IP Address Routing AdvancedStatic Route RIP NAT RIPVirtual Server  If User-defined Service Name is selected, youNAT Forwarding ALG NATPort Trigger NAT Exclude IP2.8 NAT IP Mapping FTP ALG PortIP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp BasedMinimize Delay You can choose Normal Service, Minimize CostMaximize Reliability, Maximize Throughput, or SnmpField Description Others Client LimitCommit/Reboot Admin Restore to the factory default configuration UpdateBackup/Restore Upgrade FirmwareLog PasswordTime NTP ConfigurationPing DiagnosticPing TracerouteOAM Loopback DscpDiag-Test Adsl Statistics255.255.255.0, respectively Trouble ShootingDeclaration of Conformity