Aiwa XR-MR5 manual CD Playing Using CD-R/RW PLAYER/RECORDER

CD PLAYING

(USING CD-R/RW PLAYER/RECORDER)

BASIC OPERATIONS

The CD-R/RW player/recorder of this unit can play a conventional music CD, a CD-R or CD-RW, whether the CD-R

or the CD-RW is finalized* or not.

* See "FINALIZATION" on page 23.

f,g	0-9,+10
s	DISPLAY
	CD-R/RW
a
c
MULTI JOG
CD-R/RW	SHIFT a
zCD-R/RW	s
OPEN/CLOSE	c
DISPLAY	f,g

LOADING A DISC

1Press CD-R/RW.

2Press zCD-R/RW OPEN/CLOSE to open the disc

tray.

Load a disc with the label side up.

zCD-R/RW OPEN/CLOSE

3Press zCD-R/RW OPEN/CLOSE to close the disc tray.

Shows the type of the	Music calendar (only the first
disc loaded	20 tracks are displayed)

Total number of tracks Total playing time

•Pressing g repeatedly in stop mode shows the playing time of each track one after another.

PLAYING A DISC

Load a disc.

Press cto start play.

The first track begins to play.

16 ENGLISH

Number of track	Elapsed playing
being played	time

About the level indicator

The display automatically changes to the level indicator after 4 seconds.

The level indicator shows an approximate playback sound level.

To change the display in play mode

Press DISPLAY on the main unit or press DISPLAY while pressing SHIFT on the remote control. (See page 31 for details.)

To stop play, press s.

To pause play, press a. To resume play, press again.

To search for a particular point during play, keep f or g pressed and release the button at the desired point.

To skip to the beginning of a track during play, press for g

repeatedly or turn MULTI JOG.

The unit skips forward through the tracks when turning it right, and skips back when turning it left.

To remove the disc, press zCD-R/RW OPEN/CLOSE.

To start play when the power is off (Direct Play Function)

Press CD-R/RW. The power is turned on and the loaded disc begins to play.

To replace the disc before play, press zCD-R/RW OPEN/CLOSE to remove the disc.

Selecting a track with the remote control

Press the numbered buttons and +10 to select a track.

Example:

To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0.

The selected track starts to play and continues to the end of that disc.

NOTE

•"Check Disc" is displayed if the CD-R/RW player/recorder fails to read a disc.

•When attempting to play a non-finalized CD-R or CD-RW on the CD-R/RW player/recorder, there may be a case where the disc cannot be played if the disc has been recorded on another equipment.

•The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms.

•Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction.

•Do not use irregular shape discs (example: heart-shaped, octagonal ones). It may result in malfunction.

•Do not place more than one disc on the disc tray.

•Do not tilt the unit with a disc loaded. Doing so may cause malfunctions.

•A trouble may occur in this unit if a CD-R/RW disc with dirt or scratches is used. In such a case, refer to "CD/CD-R/CD-RW GUIDE MESSAGES" on page 32.

•When a CD-R/RW disc is loaded, "OPC" is displayed right after "TOC READING" if the disc is used on the CD-R/RW player/ recorder for the first time. ("OPC", however, is not displayed if the disc is a finalized CD-R.) Wait until the message disappears before proceeding to the next step.