Sony CPD-20SF2T5 manual Entering New Timings, Power Saving Function

Adjustments

Resetting the Adjustment Data to Factory-preset Levels

To reset an adjustment item

Press the button of the adjustment item you want to reset, and then press the RESET button before the OSD (On Screen Display) disappears.

Entering New Timings

When using a video mode that is not one of the 10 factory preset modes, some fine tuning may be required to optimize the display to your preferences. Simply adjust the monitor according to the preceding adjustment instructions. The adjustments will be stored automatically and recalled whenever that mode is used.

A total of 15 user-defined modes can be stored in memory. If the 16th mode is entered, it will replace the first.

To reset the brightness, contrast, size, center, pincushion, and color temperature adjustment data at once (for the received signal)

Press the RESET button with something like a pen for 1 second when no OSD is shown.

RESET

To reset all adjustment data to factory- preset levels

Press and hold the RESET button for more than 2 seconds. All adjustment data including the brightness and contrast are reset to factory-preset levels.

RESET

Power Saving Function

This monitor meets the power saving guidelines set by the EPA Energy Star Program as well as the more stringent TCO95 (NUTEK) guidelines. It is capable of reduced power consumption when used with a computer equipped with Display Power Management Signaling (DPMS). By sensing the absence of the sync signal coming from the computer, it will reduce the power consumption as follows:

CAUTION: The Power Saving function will automatically put the monitor into Active-off state if the power switch is turned on without any video signal input. Once the horizontal and vertical syncs are sensed, the monitor will automatically return to its Normal operation state.

	State	Power	Required	POWER	u Power
Mode		consumption	resumption	SAVING	indicator
			time	indicator
1	Normal	100%	—	off	green on
	operation
	Standby	approx.	approx.	orange on	green on
2	(1st step of
	power saving)	70%	3 sec.
	Suspend	approx.	approx.	orange on	green on
3	(2nd step of
	power saving)	10%	3 sec.
	Active-off	approx.	approx.
4	(3rd step of			orange on	off
	power saving)	4%	10 sec.
5	Power-off	0%	—	off	off

8