Dell M820 HWC1010 Message, HWC1015 Message, HWC2006 Message, HWC2008 Message, HWC2011 Message

Error Code	Message Information
	Details	The backplane may be necessary for proper operation.
		System functionality may be degraded.
	Action	If removal was unintended, check presence, then reinstall or
		reconnect.
HWC1010	Message	The backplane is disabled.
	Action	If disabled unexpectedly, re-enable backplane.
HWC1015	Message	The mezzanine card <number> is absent.
	Details	The mezzanine card may be necessary for proper operation.
		System functionality may be degraded.
	Action	If removal was unintended, check presence, then reinstall or
		reconnect.
HWC2006	Message	The <name> is not installed correctly.
	LCD Message	The <name> is not installed correctly. Check connection.
	Details	The device may be necessary for proper operation. System
		functionality may be degraded.
	Action	Check presence, then re-install or reconnect.
HWC2008	Message	A fabric mismatch detected between IOM and mezzanine
		card <number>.
	Details	The fabric type for the IOM and mezzanine cards must
		match.
	Action	Check chassis fabric type in CMC GUI and compare to the
		type of IOM or mezzanine card.
HWC2011	Message	The riser board cable or interconnect is not connected, or is
		improperly connected.
	LCD Message	Riser board cable or interconnect failure. Check connection.
	Details	The riser blade cable may be necessary for proper operation.
		System functionality may be degraded.
	Action	Check the riser board or interconnect presence, then
		reinstall or reconnect.
HWC3000	Message	The <name> is removed.

100