Dell M820 PSU0005 Message, PSU0006 Message, PSU0007 Message, PSU0008 Message, PSU0016 Message

Error Code	Message Information
	Action	Verify the input source is attached to the power supply.
		Verify the input power is within the operating requirements
		for the power supply.
PSU0005	Message	The power input for power supply <number> is outside of
		the allowable range, but it is attached to the system.
	Details	The operating requirements for the power supply may be
		found in this manual or on the power supply itself.
	Action	Verify the input power is within the operating requirements
		for the power supply.
PSU0006	Message	Power supply <number> type mismatch.
	LCD Message	Power supply <number> is incorrectly configured. Check
		PSU.
	Details	Power supplies should be of the same input type and power
		rating.
	Action	Install matched power supplies and review proper
		configuration in this manual.
PSU0007	Message	Power supply <number> is operating at 110 volts, and could
		cause a circuit breaker fault.
	Details	A power supply that is designed to operate at 220V, but is
		connected to a 110V power source requires additional
		current for operation. The additional current may trip circuit-
		breakers or cause other electrical issues with the input
		source.
	Action	Check input power source and cabling. Use recommended
		input power. Review this Manual. If the issue persists, see
		Getting Help.
PSU0008	Message	Power supply <number> voltage rating does not match the
		system's requirements.
	Details	The system does not support mixed voltage power supplies.
	Action	Install a power supply with the correct voltage rating.
PSU0016	Message	Power supply <number> is absent.
	LCD Message	PSU <number> is absent. Check PSU.
	Details	The supply has been removed or has failed.

123