Dell M820 PDR1001 Message, PDR1002 Message, PDR1016 Message, PDR1024 Message, PST0128 Message

Error Code	Message Information
	Action	If unintended, verify drive installation. Remove and re-seat
		the indicated disk. If the issue persists, see Getting Help.
PDR1001	Message	Fault detected on drive <number> in disk drive bay <bay>.
	LCD Message	Fault detected on drive <number> in disk drive bay <bay>.
		Check drive.
	Details	The controller detected a failure on the disk and has taken
		the disk offline.
	Action	Re-seat the failed drive. If the issue persists, see Getting
		Help.
PDR1002	Message	A predictive failure detected on drive <number> in disk drive
		bay<bay>.
	Details	The controller received a SMART error from the drive. The
		drive is operational but needs replacement.
	Action	The drive will need replacement at the next service window.
PDR1016	Message	Drive <number> is removed from disk drive bay <bay>.
	LCD Message	Drive <number> removed from disk drive bay <bay>. Check
		drive.
	Details	The controller detected that the drive was removed.
	Action	Verify drive installation. Re-seat the failed drive. If the issue
		persists, see Getting Help.
PDR1024	Message	Drive mismatch detected for drive <number> in disk drive
		bay <bay>.
	LCD Message	Drive mismatch detected for drive <number> in bay <bay>.
		Install correct drive type.
	Details	The installed disk does not meet the array requirements, for
		example a SATA disk may not operate in an array containing
		SAS drives.
	Action	Verify that the disk meets the array requirements.
PST0128	Message	No memory is detected.
	LCD Message	No memory is detected. Inspect memory devices.
	Details	System BIOS was unable to detect memory in the system .

117