Eicon Networks DIVA T/A ISDN Modem manual Alphabetical List of Supported AT Commands

Page 19

Alphabetical List of Supported AT Commands

AT!V3=n

V.110 Parity (International version only)

44

 

 

 

AT!V4=n

V.110 Stop Bits (International version only)

44

 

 

 

AT!V5=n

V.110 Flow Control (International version only)

44

 

 

 

AT!X1=n

Specifies the X.25 version you are using.

49

 

 

 

AT!X2=n

Specifies the X.25 DTE address.

49

 

 

 

AT!X3=n

Specifies the X.25 facilities that are to be included each time a call is made.

49

 

 

 

AT!X4=n

Specifies the local ISDN prefixes to be used.

49

 

 

 

AT!X5=n

Specifies the X.25 default window size.

49

 

 

 

AT!X6=n

Specifies the X.25 maximum window size

50

 

 

 

AT!X7=n

Specifies the X.25 default packet size

50

 

 

 

AT!X8=n

Specifies the X.25 maximum packet size

50

 

 

 

AT!X9=n

Specifies the Terminal Endpoint Identifier used for X.25 over the D-channel.

50

 

 

 

AT!X10=n

Specifies the delay before opening 1st B-channel

50

 

 

 

AT!X11=n

Specifies the 1st B-channel Opening Threshold

50

 

 

 

AT!X12=n

Specifies the 1st B-channel Closing Threshold

50

 

 

 

AT!X13=n

With BACP disabled, specifies the 2nd B-channel Retry Delay.

47

 

 

 

AT!X13=n

With BACP enabled, specifies the delay before opening 2nd B-channel.

51

 

 

 

AT!X14=n

Specifies the 2nd B-channel Opening Threshold

51

 

 

 

AT!X15=n

Specifies the 2nd B-channel Closing Threshold

51

 

 

 

AT!X16=n

Strips the area code from phone numbers.

51

 

 

 

AT!X17=n

Specifies the X.25 transmit queue threshold.

51

 

 

 

AT!X18

Set Normal Mode for Bandwidth on Demand.

52

 

 

 

AT!X19

Set Economy Mode for Bandwidth on Demand.

52

 

 

 

AT!X20

Set Performance Mode for Bandwidth on Demand.

52

 

 

 

AT!X21=n

Specifies the Lowest Logical Connection Number.

52

 

 

 

AT!X22=n

Specifies whether the AO/DI feature is enabled or disabled.

52

 

 

 

AT!X25=n

Specifies how many Logical Connection Numbers (LCN) are used.

53

 

 

 

AT!X26=n

Specifies the contents of the user data field in the X.25 Call Request packet.

53

 

 

 

AT!X56=n

Delay between 64K data call failure and 56K data call attempt.

35

 

 

 

DIVA T/A ISDN Modem Reference Guide ◆ Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Diva T/A Isdn Modem Reference Guide Eight Edition July 206-193-08 Contents Diva T/A Isdn Modem Reference Guide What is ISDN?What is ISDN? Channel Isdn Communication ChannelsChannel Basic Rate Access Connecting to Isdn BRI and PRIWhat is Multilink PPP? What is BACP/BOD? What is DBA? What is Always On / Dynamic Isdn AO/DI? What is Data Compression? Locating AT Commands Locating AT Commands AT Command Groups Alphabetical List of Supported AT Commands Alphabetical List of Supported AT Commands AT! CommandsAlphabetical List of Supported AT Commands AT% Commands AT& Commands AT* Commands AT Commands AT@ Commands Other AT Commands Registers AT$ Utility Commands Mini-monitor Commands General AT Commands General AT Commands Defaults Isdn Configuration CommandsValues for n Isdn Configuration Commands AT!D3=n None defaultDefault1 INS-Net64, NI-1, or 5ESS, µ law will be used defaultAT!N3=n Default null string this is an optional valueAT!N2=n Number. Numbers are separated by a semicolonAT!X56=n For more details, refer to the Rvscom documentationOn region 255 do not attempt 56k data call retry COM Port Configuration Commands Ring COM Port Configuration CommandsUpon connection, the Diva T/A reports the DCE speed For example, ConnectCall Control Commands ATA Call Control CommandsATH Configuration Commands Configuration Commands AT!V0=n Use the default settingsProfile Commands Multilink PPP Commands Multilink PPP Commands AT%M3=b3c665ac11 Endpoint Discriminator Class/AddressInternet Protocol IP Always On / Dynamic Isdn AT Commands Always On / Dynamic Isdn AT Commands AT!X14=n AT!X13=n when Bacp is disabled, seeWill be opened after the delay specified by AT!X10 Default 1000 bytesDefined as follows Default values for each setting, and is defined as followsDefault AT!X22=n AT!X18AT!X26=n Default CF PPP overAT!X25=n Connection numbers affects the range ofAT!X21. SeeAT!X21Utility Commands Start or Display the Result of a PPP trace Utility CommandsInternal TA access command reserved for VU Start or display the Result of a Lapd traceSoft reset the unit and enter the monitor Enter the monitor on the next resetStart an AO/DI X.25 Trace AT? Register CommandsRegister Commands Analog Device Commands AT*Fn Analog Device CommandsEnable using same terminal endpoint identifier as data port To be disabledDisable. Recommended for modem/fax calls Enable with default values defaultMini-monitor Commands AT Command Result Codes Connect AT Command Result CodesCarrier Connect Protocol None Protocol Transparent ModeConnect 75T/1200R Connect 1200T/75RBACP/BOD Index
Top Page Image Contents