Eicon Networks DIVA T/A ISDN Modem AT*Sn=v, To be disabled, Enable with default values default

Page 61

Analog Device Commands

AT*Sn=v	Disable Analog Device Calling Features. Specifies whether supplementary service is
	to be disabled.
	n=1	Analog device port 1 (PHONE 1).
	n=2	Analog device port 2 (PHONE 2).
	v=0	Disable. Recommended for modem/fax calls.
	v=1	Enable with default values (default).
	The following two options are for advanced users only.
	v=5	Enable using same terminal endpoint identifier as data port.
	v=9	Enable using separate terminal endpoint identifier.
	Note: This parameter does not take effect until you restart your DIV AT/A.

AT*Vn=v	Enable/Disable VoiceMail (North America Only). Specifies whether VoiceMail is
	enabled or disabled.
	n=1	Analog device port 1 (PHONE 1).
	n=2	Analog device port 2 (PHONE 2).
	v=0	Disable (default).
	v=1	Enable.
	Notes:
	• If v=0 is selected and voice mail is detected, DIVA T/A automatically enables VoiceMail.
	• If the SPID corresponding to an analog device port changes, the parameter will
	automatically be reset to 0. Also, if the DIVA T/A is reset to factory profile, the
	parameter is reset to 0.
	• This parameter does not take effect until you restart your DIV AT/A.

AT*Wn=v	Call Waiting Support (International version only). Specifies whether support for call
	waiting is enabled.
	n=1	Analog device port 1 (PHONE 1).
	n=2	Analog device port 2 (PHONE 2).
	v=0	Disable.
	v=1	Enable (default).

DIVA T/A ISDN Modem Reference Guide ◆ Page 61

Image 61

Contents Diva T/A Isdn Modem Reference Guide Eight Edition July 206-193-08 Contents Diva T/A Isdn Modem Reference Guide What is ISDN?What is ISDN? Channel Isdn Communication ChannelsChannel Basic Rate Access Connecting to Isdn BRI and PRIWhat is Multilink PPP? What is BACP/BOD? What is DBA? What is Always On / Dynamic Isdn AO/DI? What is Data Compression? Locating AT Commands Locating AT Commands AT Command Groups Alphabetical List of Supported AT Commands Alphabetical List of Supported AT Commands AT! CommandsAlphabetical List of Supported AT Commands AT% Commands AT& Commands AT* Commands AT Commands AT@ Commands Other AT Commands Registers AT$ Utility Commands Mini-monitor Commands General AT Commands General AT Commands Defaults Isdn Configuration CommandsValues for n Isdn Configuration Commands Default1 None defaultINS-Net64, NI-1, or 5ESS, µ law will be used default AT!D3=nAT!N2=n Default null string this is an optional valueNumber. Numbers are separated by a semicolon AT!N3=nAT!X56=n For more details, refer to the Rvscom documentationOn region 255 do not attempt 56k data call retry COM Port Configuration Commands Ring COM Port Configuration CommandsUpon connection, the Diva T/A reports the DCE speed For example, ConnectCall Control Commands ATA Call Control CommandsATH Configuration Commands Configuration Commands AT!V0=n Use the default settingsProfile Commands Multilink PPP Commands Multilink PPP Commands AT%M3=b3c665ac11 Endpoint Discriminator Class/AddressInternet Protocol IP Always On / Dynamic Isdn AT Commands Always On / Dynamic Isdn AT Commands Will be opened after the delay specified by AT!X10 AT!X13=n when Bacp is disabled, seeDefault 1000 bytes AT!X14=nDefault AT!X22=n Default values for each setting, and is defined as followsAT!X18 Defined as followsAT!X25=n Default CF PPP overConnection numbers affects the range ofAT!X21. SeeAT!X21 AT!X26=nUtility Commands Internal TA access command reserved for VU Utility CommandsStart or display the Result of a Lapd trace Start or Display the Result of a PPP traceSoft reset the unit and enter the monitor Enter the monitor on the next resetStart an AO/DI X.25 Trace AT? Register CommandsRegister Commands Analog Device Commands AT*Fn Analog Device CommandsDisable. Recommended for modem/fax calls To be disabledEnable with default values default Enable using same terminal endpoint identifier as data portMini-monitor Commands AT Command Result Codes Connect AT Command Result CodesCarrier Connect Connect 75T/1200R Protocol Transparent ModeConnect 1200T/75R Protocol NoneBACP/BOD Index