Eicon Networks DIVA T/A ISDN Modem manual Analog Device Commands, AT*Fn

Page 60

Analog Device Commands

AT*Fn

Analog Device Ring Frequency. Specifies the analog device ring frequency. When

 

n=0, the ring frequency is determined by the country/region selected with the AT*Pn

 

command.

 

 

 

 

n=0

Ring frequency determined by region (AT*Pn) (default).

 

n=1

20 Hz.

 

 

 

 

n=2

25 Hz.

 

 

 

 

n=3

40 Hz.

 

 

 

 

n=4

50 Hz.

 

 

 

 

Note: This parameter does not take effect until you restart your DIV AT/A.

 

 

AT*Kn=v

Analog Device Calling Features (North America only). Specifies the feature key for

 

analog device calling features.

 

 

 

n=1

Conference Call

 

 

 

 

n=3

Call Drop

 

 

 

 

n=5

Message Waiting Indicator

 

 

 

v=Any value in the range 0-65535 (the defaults are: Conference Call=60, Call

 

Transfer=61, Call Drop=62, Message Waiting Indicator=63)

 

Note: This parameter does not take effect until you restart your DIV AT/A.

 

 

AT*M=v

Visual Message Indicator Refresh Time (North America only). Specifies how

 

frequently DIVA T/A should refresh the Visual Message Indicator. Setting v=0 disables

 

Visual Message Indicator feature.

 

 

 

Range of v= 1 to 60 (specify the time in minutes)

 

 

Default: 30.

 

 

 

 

It is recommended that this setting not be set to below 30 minutes.

 

 

AT*Pn

Analog Device Country Specific Parameters. Specifies the country for which certain

 

parameters (ring pattern, ring frequency, pulse pattern, gains) are implemented.

 

n=0

United States

n=8

Sweden

n=20 Portugal

 

 

(default in North

n=9

Ireland

n=21 China

 

 

America)

n=10 Denmark

n=22 Australia

 

n=1

International

n=11 Italy

n=23 Hong Kong

 

 

(default outside

n=12 Norway

n=24 Singapore

 

 

North America)

n=13 Switzerland

n=25 Canada

 

n=2

United Kingdom

n=14 Austria

n=26 India

 

n=3

Belgium

n=15 Cyprus

n=27 Japan

 

n=4

France

n=16 Finland

n=28 South Africa

 

n=5

Germany

n=17 Greece

n=29 United Arab

 

n=6

Netherlands

n=18 Iceland

Emirates (UAE)

 

n=7

Spain

n=19 Luxembourg

 

 

Note: This parameter does not take effect until you restart your DIV AT/A.

 

 

AT*Rn=v

Analog Device Alternate Ring. Specifies whether normal or distinctive ring is used.

 

n=1

Analog device port 1 (PHONE 1).

 

 

n=2

Analog device port 2 (PHONE 2).

 

 

v=0

Normal Ring (default).

 

 

 

 

v=1

Distinctive Ring.

 

 

 

 

Note: This parameter does not take effect until you restart your DIV AT/A.

 

 

 

 

 

 

DIVA T/A ISDN Modem Reference Guide ◆ Page 60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Diva T/A Isdn Modem Reference Guide Eight Edition July 206-193-08 Contents What is ISDN? Diva T/A Isdn Modem Reference GuideWhat is ISDN? Isdn Communication Channels ChannelChannel Connecting to Isdn BRI and PRI Basic Rate AccessWhat is Multilink PPP? What is BACP/BOD? What is DBA? What is Always On / Dynamic Isdn AO/DI? What is Data Compression? Locating AT Commands Locating AT Commands AT Command Groups Alphabetical List of Supported AT Commands AT! Commands Alphabetical List of Supported AT CommandsAlphabetical List of Supported AT Commands AT% Commands AT& Commands AT* Commands AT Commands AT@ Commands Other AT Commands Registers AT$ Utility Commands Mini-monitor Commands General AT Commands General AT Commands Isdn Configuration Commands DefaultsValues for n Isdn Configuration Commands None default Default1INS-Net64, NI-1, or 5ESS, µ law will be used default AT!D3=nDefault null string this is an optional value AT!N2=nNumber. Numbers are separated by a semicolon AT!N3=nFor more details, refer to the Rvscom documentation AT!X56=nOn region 255 do not attempt 56k data call retry COM Port Configuration Commands COM Port Configuration Commands RingFor example, Connect Upon connection, the Diva T/A reports the DCE speedCall Control Commands Call Control Commands ATAATH Configuration Commands Configuration Commands Use the default settings AT!V0=nProfile Commands Multilink PPP Commands Multilink PPP Commands Endpoint Discriminator Class/Address AT%M3=b3c665ac11Internet Protocol IP Always On / Dynamic Isdn AT Commands Always On / Dynamic Isdn AT Commands AT!X13=n when Bacp is disabled, see Will be opened after the delay specified by AT!X10Default 1000 bytes AT!X14=nDefault values for each setting, and is defined as follows Default AT!X22=nAT!X18 Defined as followsDefault CF PPP over AT!X25=nConnection numbers affects the range ofAT!X21. SeeAT!X21 AT!X26=nUtility Commands Utility Commands Internal TA access command reserved for VUStart or display the Result of a Lapd trace Start or Display the Result of a PPP traceEnter the monitor on the next reset Soft reset the unit and enter the monitorStart an AO/DI X.25 Trace Register Commands AT?Register Commands Analog Device Commands Analog Device Commands AT*FnTo be disabled Disable. Recommended for modem/fax callsEnable with default values default Enable using same terminal endpoint identifier as data portMini-monitor Commands AT Command Result Codes AT Command Result Codes ConnectCarrier Connect Protocol Transparent Mode Connect 75T/1200RConnect 1200T/75R Protocol NoneIndex BACP/BOD
Top Page Image Contents