Eicon Networks DIVA T/A ISDN Modem manual AT$ Utility Commands

Page 27

Alphabetical List of Supported AT Commands

AT$ (Utility) Commands

AT$CP=n	Enable/Disable Compression	54

AT$EX	View Exprintf buffer	54

AT$In	On Demand SPID Testing (North America only)	54

AT$IG	SPID Guessing (North America only)	54

AT$Rn	Action on fatal error	54

AT$SL	Stop LAPD Trace	54

AT$SM	Stop Mail Trace	54

AT$SP	Stop PPP Trace	54

AT$SQ	Stop Q.931 Trace	54

AT$SX	Stop X.25 trace (AO/DI)	54

AT$VCn	Set AT command trace	54

AT$VI	View Initial Profile	54

AT$VL	Start or View a LAPD Trace	55

AT$VM	Start or View a Mail Trace	55

AT$VP	Start or View a PPP Trace	55

AT$VQ	Start or View a Q.931 Trace	55

AT$VU	Internal T/A access command	55

AT$VX	Start AO/DI trace	56

AT$Y	Enter Mini Monitor on Next Reset	56

AT$Z	Soft Reset device and Enter Mini-Monitor	56

DIVA T/A ISDN Modem Reference Guide ◆ Page 27

Image 27

Contents Diva T/A Isdn Modem Reference Guide Eight Edition July 206-193-08 Contents Diva T/A Isdn Modem Reference Guide What is ISDN?What is ISDN? Channel Isdn Communication ChannelsChannel Basic Rate Access Connecting to Isdn BRI and PRIWhat is Multilink PPP? What is BACP/BOD? What is DBA? What is Always On / Dynamic Isdn AO/DI? What is Data Compression? Locating AT Commands Locating AT Commands AT Command Groups Alphabetical List of Supported AT Commands Alphabetical List of Supported AT Commands AT! CommandsAlphabetical List of Supported AT Commands AT% Commands AT& Commands AT* Commands AT Commands AT@ Commands Other AT Commands Registers AT$ Utility Commands Mini-monitor Commands General AT Commands General AT Commands Isdn Configuration Commands DefaultsValues for n Isdn Configuration Commands AT!D3=n None defaultDefault1 INS-Net64, NI-1, or 5ESS, µ law will be used defaultAT!N3=n Default null string this is an optional valueAT!N2=n Number. Numbers are separated by a semicolonFor more details, refer to the Rvscom documentation AT!X56=nOn region 255 do not attempt 56k data call retry COM Port Configuration Commands Ring COM Port Configuration CommandsUpon connection, the Diva T/A reports the DCE speed For example, ConnectCall Control Commands ATA Call Control CommandsATH Configuration Commands Configuration Commands AT!V0=n Use the default settingsProfile Commands Multilink PPP Commands Multilink PPP Commands Endpoint Discriminator Class/Address AT%M3=b3c665ac11Internet Protocol IP Always On / Dynamic Isdn AT Commands Always On / Dynamic Isdn AT Commands AT!X14=n AT!X13=n when Bacp is disabled, seeWill be opened after the delay specified by AT!X10 Default 1000 bytesDefined as follows Default values for each setting, and is defined as followsDefault AT!X22=n AT!X18AT!X26=n Default CF PPP overAT!X25=n Connection numbers affects the range ofAT!X21. SeeAT!X21Utility Commands Start or Display the Result of a PPP trace Utility CommandsInternal TA access command reserved for VU Start or display the Result of a Lapd traceEnter the monitor on the next reset Soft reset the unit and enter the monitorStart an AO/DI X.25 Trace AT? Register CommandsRegister Commands Analog Device Commands AT*Fn Analog Device CommandsEnable using same terminal endpoint identifier as data port To be disabledDisable. Recommended for modem/fax calls Enable with default values defaultMini-monitor Commands AT Command Result Codes AT Command Result Codes ConnectCarrier Connect Protocol None Protocol Transparent ModeConnect 75T/1200R Connect 1200T/75RBACP/BOD Index