Eicon Networks DIVA T/A ISDN Modem manual General AT Commands

Page 29

General AT Commands

The following table describes the general AT commands available to the DIVA T/A.

ATIn

View Product Information. Displays information about your DIVA T/A.

 

n=0

Displays hardware code for the DIVA T/A.

 

n=1

Displays software checksum.

 

n=2

Reports “OK”.

 

n=3

Displays software version.

 

n=4

Displays capability string.

 

n=6

Displays data pump chipset version.

 

n=8

Displays Eicon Technology DIVA T/A.

 

n=9

Display the external COM port plug and play ID of the DIVA T/A.

 

n=20 Displays product number.

 

n=100 Displays list of supported countries (phone).

 

 

ATO

Return Online. In the online data mode, the DIVA T/A is ready to send and receive data,

 

providing you are connected. Normally, the DIVA T/A remains in this mode until your

 

computer sends the data mode escape sequence (+++) or until the call is terminated.

 

Note: This command can only be used when the DIVA T/A is in the online escape mode.

 

 

AT@DATE=

Set Date. Sets the date on the DIVA T/A. This command is useful when the DIVA T/A

 

sends the call ID to a telephone with Call Display (North America only).

 

 

AT@DATE?

Current Date. Displays the current date of the system. The format is mm-dd-yy.

 

 

AT@TIME=

Set Time. Sets the time on the DIVA T/A. This command is useful when the DIVA T/A

 

sends the call ID to a telephone with Call Display. The format is hh:mm:ss.

 

 

AT@TIME?

Current Time. Displays the current time of the system. The format is hh:mm:ss.

 

 

AT@MENU

Activate VT100 Configuration Tool. The AT@MENU command activates the DIVA T/A

 

VT100 Configuration tool for configuring basic ISDN parameters.

 

 

AT>Hs

View Help Information. Displays full or partial help for any AT command, where s

 

specifies which AT command help is requested.

 

 

AT>VD

View Connection and Link Status Information. This command displays link and

 

connection status for troubleshooting problems. Your Eicon Technology Customer

 

Services representative may ask you to display this information.

 

 

AT>VDC

View Connection Status. Displays the connection status.

 

 

AT>VDD

Initialization Status Display (North America only). Displays information about the

 

detection progress, the initialization of the logical channels, as well as auxiliary

 

information.

 

 

AT>VDL

View Link States. Displays the link states.

 

 

AT>VT

View Stored Telephone Numbers. You can display a list of all stored telephone

 

numbers currently saved on your DIVA T/A.

 

 

AT>VX

View X.25 Status (AO/DI). Displays the status of the X.25 connection.

 

 

AT>?

Last AT Command Result Explained. The AT>? Command reports the result of the last

 

AT command issued. This command is useful for debugging long strings of AT

 

commands and for determining which command was rejected and why.

 

 

 

DIVA T/A ISDN Modem Reference Guide ◆ Page 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Diva T/A Isdn Modem Reference Guide Eight Edition July 206-193-08 Contents Diva T/A Isdn Modem Reference Guide What is ISDN?What is ISDN? Channel Isdn Communication ChannelsChannel Basic Rate Access Connecting to Isdn BRI and PRIWhat is Multilink PPP? What is BACP/BOD? What is DBA? What is Always On / Dynamic Isdn AO/DI? What is Data Compression? Locating AT Commands Locating AT Commands AT Command Groups Alphabetical List of Supported AT Commands Alphabetical List of Supported AT Commands AT! CommandsAlphabetical List of Supported AT Commands AT% Commands AT& Commands AT* Commands AT Commands AT@ Commands Other AT Commands Registers AT$ Utility Commands Mini-monitor Commands General AT Commands General AT Commands Values for n Isdn Configuration CommandsDefaults Isdn Configuration Commands Default1 None defaultINS-Net64, NI-1, or 5ESS, µ law will be used default AT!D3=nAT!N2=n Default null string this is an optional valueNumber. Numbers are separated by a semicolon AT!N3=nOn region 255 do not attempt 56k data call retry For more details, refer to the Rvscom documentationAT!X56=n COM Port Configuration Commands Ring COM Port Configuration CommandsUpon connection, the Diva T/A reports the DCE speed For example, ConnectCall Control Commands ATA Call Control CommandsATH Configuration Commands Configuration Commands AT!V0=n Use the default settingsProfile Commands Multilink PPP Commands Multilink PPP Commands Internet Protocol IP Endpoint Discriminator Class/AddressAT%M3=b3c665ac11 Always On / Dynamic Isdn AT Commands Always On / Dynamic Isdn AT Commands Will be opened after the delay specified by AT!X10 AT!X13=n when Bacp is disabled, seeDefault 1000 bytes AT!X14=nDefault AT!X22=n Default values for each setting, and is defined as followsAT!X18 Defined as followsAT!X25=n Default CF PPP overConnection numbers affects the range ofAT!X21. SeeAT!X21 AT!X26=nUtility Commands Internal TA access command reserved for VU Utility CommandsStart or display the Result of a Lapd trace Start or Display the Result of a PPP traceStart an AO/DI X.25 Trace Enter the monitor on the next resetSoft reset the unit and enter the monitor AT? Register CommandsRegister Commands Analog Device Commands AT*Fn Analog Device CommandsDisable. Recommended for modem/fax calls To be disabledEnable with default values default Enable using same terminal endpoint identifier as data portMini-monitor Commands AT Command Result Codes Carrier Connect AT Command Result CodesConnect Connect 75T/1200R Protocol Transparent ModeConnect 1200T/75R Protocol NoneBACP/BOD Index
Top Page Image Contents