Dell 200 owner manual Changing Boot Sequence for Future Boots, 106

4Select a device and press <Enter>.

For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.

NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.

NOTE: You can also change the boot sequence using the Boot Sequence options in the System Setup Options (see page 102).

Changing Boot Sequence for Future Boots

1Enter system setup (see page 100).

2Press the arrow keys to highlight the Boot Sequence menu option and press <Enter> to access the menu.

NOTE: Write down your current boot sequence in case you want to restore it.

3Press the up- and down-arrow keys to move through the list of devices.

4Press the spacebar to enable or disable a device (enabled devices have a checkmark).

5Press the <u> key or the <d> key to move a selected device up or down the list.

106

Appendix