Dell 200 owner manual Retention arm tab, Edge connector Securing slot Card connector Securing tab

retention arm tab

PCI Express card

edge connector

70

securing slot

card connector

securing tab

3If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 5.

4If you are replacing a card that is already installed in the computer, remove the card.

If necessary, disconnect any cables connected to the card. Grasp the card by its top corners, and ease it out of its connector.

5Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

6Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

7If you are installing the card into the x16 card connector, position the card so the securing slot is aligned with the securing tab, and gently pull the securing tab.

Removing and Installing Parts