Dell 200 Replacing the Modem, Screws Modem cable, Pull tab Removing and Installing Parts

Modem

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: Before you remove or install the modem, make sure to disconnect all telephone and network cables from your computer.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

Replacing the Modem

1Follow the procedures in "Before You Begin" on page 55.

NOTE: For easier access to the modem, it may be necessary to remove the power cable from the power connector on the system board.

screws (2)

modem cable

modem

pull tab

Removing and Installing Parts

89