Re m o v i n g a V R M
VRM
securing clip |
VRM connector
4Grasp the VRM by its top corners, and ease it out of its connector.
Installing a VRM
1Press the securing clips at each end of the socket outward until they snap open (see "Removing a VRM").
2Align the slots on the bottom of the module with the ridges inside the socket.
3Press the module straight down into the socket until the securing clips snap into place at the ends of the module.
4Install the airflow shroud.
5Close the computer cover.
6Stand the computer upright.
7Reconnect the computer and devices to their electrical outlets, and turn them on.