S y s t e m M e s s a g e s
Message | Cause | Action |
|
|
|
Address mark not found | The BIOS found a faulty disk sector | See "Hard Drive Problems." |
| or could not find a particular disk |
|
| sector. |
|
Alert! | The |
detected. | installed, has failed, or is not properly |
| connected to the system board. |
Ensure that an operational
To locate the
Alert! Chipset heat sink | The chip set heat sink is not properly |
not detected. | installed on the system board. |
Ensure that chip set heat sink is properly installed on the system board.
To locate the
Alert! Cover | was | The computer cover was opened. | Enter system setup and reset the Chassis | |
previously | removed. |
| Intrusion option. | |
|
|
|
| |
Alert! CPU | 0 | failed Build- The microprocessor 0 is faulty or | See "Microprocessor Problems." | |
In Self Test | (BIST). | improperly seated. |
|
Alert! CPU 1 failed Build- In Self Test (BIST).
The microprocessor 1 is faulty or | See "Microprocessor Problems." |
improperly seated. |
|
Alert! CPU 0 fan not | The microprocessor 0 cooling fan is | Ensure that an operational cooling fan for |
detected. | not installed, has failed, or is not | microprocessor 0 is installed and |
| properly connected to the system | connected to the system board. Also, |
| board. | ensure that the microprocessor airflow |
|
| shroud is properly installed. |
|
| See "Microprocessor Airflow Shroud." |
|
|
|
Alert! CPU 1 fan not | The microprocessor 1 cooling fan is | Ensure that an operational cooling fan for |
detected. | not installed, has failed, or is not | microprocessor 1 is installed and |
| properly connected to the system | connected to the system board. Also, |
| board. | ensure that the microprocessor airflow |
|
| shroud is properly installed. |
|
| See "Microprocessor Airflow Shroud." |
|
|
|