NOTE: If you have a SCSI controller installed in your computer, make sure the controller is configured to boot after IDE devices. For more information, see your SCSI controller documentation.
6Select the appropriate language for menu options. If you have changed a partition table and restarted your computer, select the option to Continue Windows NT Reinstall.
A numbered list displays the available options. The following list describes each option.
NOTE: Once you select one of the following options, you cannot return to the list to select another option. If you decide that you do not want to continue with an option or wish to select another option, you must restart your computer.
•Option 1 – Start/Continue Windows NT® Installation
NOTICE: This option has the potential to erase partial data or the entire hard drive.
Helps you reinstall Windows NT Workstation on your computer. Use this option if your computer has become unusable or if you require a clean installation of this OS. To complete the reinstallation, you will need your Windows NT CD, your service pack CD, and your Windows NT Product Key (also called the Product ID or COA).
For more information, refer to the Windows NT installation guide provided with your computer.
•Option 2 – Dell Diagnostics
Loads the Dell Diagnostics that allow you to perform tests and help determine if your computer has possible problems. When the Diagnostics Menu appears, select one of the options to continue.
•Option 3 – Dell ZZTOP Imaging Software
NOTICE: This option reformats your hard drive and causes data loss. Do not select this option unless a qualified Dell technician has instructed you to do so.
Helps you to restore a corrupted hard drive by reinstalling Windows and reconfiguring the computer to factory defaults.