S y s t e m M e s s a g e s ( c o n t in u e d )
Message | Cause | Action |
|
|
|
Gate A20 failure | One or more memory modules may | See "System Memory Problems." |
| be loose. |
|
General failure | The operating system is unable to |
| carry out the command. |
This message is usually followed by specific
Hard disk configuration | The hard drive failed initialization. | See "Hard Drive Problems." |
error |
|
|
|
|
|
Hard disk controller | The hard drive failed initialization. | See "Hard Drive Problems." |
failure |
|
|
Hard disk failure |
|
|
Hard drive read failure |
|
|
|
|
|
Invalid configuration | The system configuration | Enter system setup and correct the system |
information - please run | information does not match the | configuration information. |
SETUP program | hardware configuration. |
|
|
|
|
Keyboard controller | A cable or connector may be loose, or | See "Keyboard Problems." |
failure | the keyboard or keyboard/mouse |
|
Keyboard failure | controller may be faulty. |
|
|
| |
Keyboard stuck key failure |
|
|
|
|
|
Memory address line | One or more memory modules may | See "System Memory Problems." |
failure at address, read | be faulty or improperly seated. |
|
value expecting value |
|
|
Memory allocation error | The software you are attempting to |
| run is conflicting with the operating |
| system or another application |
| program or utility. |
Turn off the computer, wait 30 seconds, and turn it on. Try to run the program again. If the problem persists, contact the software company.